Integral LED Recessed Evofire IP65 Fire Rated Downlight with Insulation Guard - White
This can-less design provides better airflow, enabling LED lamps to run cooler and prolong life. R...This can-less design provides better airflow, enabling LED lamps to run cooler and prolong life. Recessed LED placement for low-glare. It features an ultra-thin 1mm bezel, fire-resistant glass protection, and complies with Building Regulations parts B, C, E, and L. It is fire-resistant for Solid Timber (30-60-90min) and I-Joist (30-60min). The downlight includes screwless push-fit terminals and a block. It requires LED GU10 lamps only, max 10W (not included). Dimensions are 85mm diameter, 38mm depth, with a 70mm cut-out. The recessed design ensures a sleek and stylish installation, holding the lamp higher in the ceiling for a designer look with lower glare. The matt white finish suits most home interiors, and the IP65 rating makes it suitable for kitchens or bathrooms. The insulation guard maintains a vital air gap for safety when installing with ceiling insulation. It is fire-rated to 30, 60, and 90 minutes and is air tightness compliant with Part C and Part L, and resistance to sound compliant with Part E.
This guide is for anyone looking to install or maintain the Luminosa Lighting Integral LED Recessed Evofire Downlight. It offers a sleek, fire-rated, and energy-efficient lighting solution suitable for various rooms, including kitchens and bathrooms. A key benefit is its recessed design with low glare and fire protection. Note that the LED GU10 lamps are not included, and the product requires specific lamp types.
All features
Colour
White
Brand
Luminosa Lighting
Extended Product Information
FAQs
What type of lamps does it use?
It uses LED GU10 lamps, with a maximum power of 10W. These are not included and must be purchased separately.
Is it suitable for bathrooms?
Yes, it is IP65 rated, making it suitable for use in bathrooms.
What are the dimensions?
The diameter is 85mm, the depth is 38mm, and the cut-out size required is 70mm.
What does the fire rating mean?
It means the downlight has been tested and certified to withstand fire for a specified duration, providing added safety.
How do I install it?
Follow the installation steps provided in the setup section: cut a hole, connect the wiring, insert the light, and install the lamp.
What is the warranty?
Please refer to the product packaging or retailer for warranty details.
Can I use any LED GU10 lamp?
No, ensure the lamp is LED GU10 and does not exceed 10W. Follow the manufacturer's recommendations.
Troubleshooting
Downlight doesn't turn on.
Check the wiring connections and ensure the LED GU10 lamp is correctly installed. Verify the circuit breaker hasn't tripped.
Flickering light.
Check the LED lamp and replace it if necessary. Ensure the lamp is compatible and not exceeding the 10W maximum.
Water ingress observed.
Ensure the downlight is correctly installed, check the seal, and consider professional assistance.
Pros and Cons
Pros
Fire-rated for enhanced safety.
Suitable for damp environments (IP65).
Sleek, modern design with low glare.
Easy installation with screwless terminals.
Energy-efficient with LED compatibility.
Complies with key building regulations
Cons
Requires separate purchase of LED GU10 lamps.
Limited to a maximum of 10W lamps.
Requires a 70mm cut-out for installation.
The ultra-thin 1mm bezel may be delicate during installation.
Professional installation may be required depending on experience.
Setup, Compatibility & Care
Setup:
Ensure the power is switched off before starting installation.
Cut a 70mm hole in the ceiling.
Connect the wires to the screwless push-fit terminals.
Insert the downlight into the cut-out.
Install the LED GU10 lamp (max 10W).
Restore power and test the light.
Compatibility:
Lamps: Compatible only with LED GU10 lamps, max 10W.
Environment: Suitable for use in kitchens and bathrooms (IP65 rated).