Best current price£5.77from Autodoc
Shopping.co.uk recommended and popular offers
Autodoc£5.77Visit shop HENGST FILTER Oil filter OPEL,RENAULT,FIAT H11W02 55189961,73500506,8933004195 Engine oil filter 1109L4,1109R8,MLS000462A,MLS000602,6001545344,5006227
Visit shop9 offers from £5.77 - £19.51
View price history by clicking the chart icon.
The Hengst Filter H11W02 is an essential engine maintenance component designed for vehicle owners and mechanics seeking reliable lubrication and debris filtration. By offering superior fluid containment and consistent oil flow, it helps prolong the service life of internal engine components. Users should note that this specific spin-on filter is model-dependent, so verifying exact engine compatibility before purchase is critical to ensure a proper seal.
| Model Part Number | H11W02 |
|---|---|
| Brand | Hengst Filter |
The filter has an outer diameter of 76.5 mm, an inner diameter of 62.5 mm, and a height of 56 mm.
This filter uses a standard M20x1.5 thread.
It is recommended to replace the filter at every oil change interval as specified by your vehicle's owner manual.
While not strictly required for all vehicles, pre-filling the filter with fresh oil can reduce dry-start time for the engine.
No, compatibility depends on your engine's specific thread size and mounting dimensions. Always check the part number against your vehicle's manual.
Do not install a dented filter; structural damage to the housing can lead to leaks or total failure under pressure.
Check that the old gasket was removed from the engine block; if the old gasket remains, remove it and re-tighten the new filter.
Use a dedicated oil filter wrench or pliers designed for spin-on filters to provide the necessary leverage.
Ensure the engine is cool to the touch and use a strap-style filter wrench to avoid crushing the housing.
Installation of the H11W02 is a straightforward process involving the removal of the old filter and the securing of the new unit. Before installing, ensure the mounting surface on the engine block is clean and free of old gasket remnants. Apply a thin film of clean oil to the new filter's rubber gasket to ensure a tight seal. Hand-tighten the filter until the gasket makes contact, then apply an additional three-quarter turn or follow your vehicle's specific torque recommendations. Do not overtighten, as this can damage the gasket. Periodically inspect the filter area during routine maintenance for any signs of seepage.
