Best current price£3.62from B&Q
Shopping.co.uk recommended and popular offers
B&Q£3.62Visit shop B&Q - Phillips Pan Head Zinc-Plated Carbon Steel (C1022) Self-Drilling Screw (Dia)4.8mm (L)32mmPack Of 25
Visit shop1 offer from £3.62
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and tradespeople needing reliable fasteners for various projects. The Diall Phillips Pan Head Screws offer durability and a secure fit for wood and other materials. A potential caveat is that they are self-drilling, which may not be suitable for all applications without pre-drilling in harder materials.
| Brand | Diall |
|---|
These screws are constructed from durable carbon steel with a zinc plating.
The zinc plating offers some corrosion resistance, but they are best suited for indoor or protected outdoor applications. For prolonged outdoor exposure, stainless steel screws are recommended.
The pan head provides a larger bearing surface, which helps to distribute the load and prevent the screw from pulling through softer materials. It sits relatively flat on the surface.
Not always. The self-drilling tip is designed to start its own hole in softer materials like wood or drywall. However, for hardwoods or to prevent splitting, pre-drilling is advisable.
These screws use a standard Phillips drive, typically a PH2 size bit is suitable for the 4.8mm diameter.
Each pack contains 25 screws.
No, these screws are intended for general DIY and light-duty applications, not for heavy structural support.
Pre-drill a pilot hole in the material. Ensure you are using the correct size Phillips bit and that the material is not too dense for the self-drilling tip.
Ensure the Phillips bit is fully seated in the screw head. Reduce driving speed and pressure. If the head is already stripped, you may need to remove it with pliers or use a screw extractor.
Stop driving the screw. Remove the screw and pre-drill a pilot hole. For hardwoods, a pilot hole approximately 75% of the screw's shank diameter is recommended.
Ensure the screw is fully driven into the material. If fastening into drywall, consider using a drywall anchor. Check if the material is too soft or damaged for adequate grip.
Setup: These screws are designed for direct use. For softer materials like particleboard or softwoods, the self-drilling tip can initiate the hole. For hardwoods or where splitting is a concern, it is advisable to pre-drill a pilot hole slightly smaller than the screw's shank diameter using a standard drill bit. Use a Phillips head screwdriver or a drill with a Phillips bit to drive the screws.
Compatibility: Compatible with standard Phillips head screwdrivers and power tools. Suitable for use in wood, drywall, and some plastics.
Care: Store screws in a dry environment to prevent premature corrosion of the zinc plating. Avoid prolonged exposure to moisture or salt-laden air. Clean any dirt or debris from the screws before use if they have been stored for an extended period.
