Tackle tough dirt and coatings on various surfaces effortlessly using the StoneCare4U Ultra Cleane...Tackle tough dirt and coatings on various surfaces effortlessly using the StoneCare4U Ultra Cleaner Pro 2.5L. Ideal for use on ceramic, porcelain, and natural stone like marble and limestone, this professional-grade cleaner contains potent solvents and cleaning agents that effectively dissolve stubborn stains, wax layers, and grease. With coverage of up to 25m2 per litre, the dilution rate will determine the actual coverage area when using Essential Ultra Cleaner Pro. Warning: Keep out of the reach of children and pets. How to apply: Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, face mask and clothing. Certainly, we advise performing a small test application in an inconspicuous area on-site before use. This will indicate the suitability and effectiveness of the product for your surface. If unsuitable for your requirements, do not proceed but contact us to return the product. Depending on the stained or soiled area, Ultra Cleaner Pro can be used neat for removing waxes/coatings or diluted up to 10 parts water to 1 part for heavily soiled areas. Wet the area with clean water before applying the cleaner to the soiled area. Allow the cleaner to dwell for approximately 15 to 20 minutes, not allowing it to dry on the surface. After 15 to 20 minutes agitate with a stiff brush and clean water, scrub and rinse thoroughly with clean water. In cases of heavy soiling or staining, repeat the process increasing the amount of cleaner if necessary. Stonecare4U Ultra Cleaner Pro is a professional heavy-duty cleaner suitable for use on ceramic, porcelain and many other types of natural stone surfaces, including polished marble and limestone. It contains a combination of agents which are very effective in dissolving ingrained dirt, wax layers, grease and many other stains or coatings.Important note: Protect painted or varnished surfaces with a masking material prior to use as this product may cause damage to sensitive surfaces. Always test the product in an inconspicuous area prior to use. Remove stubborn dirt and coatings from ceramic, porcelain, marble, and limestone surfaces with ease using StoneCare4U Ultra Cleaner Pro 2.5L. Its powerful solvents and cleaning agents effectively dissolve grease, wax, and stubborn stains. Coverage is up to 25m² per litre, though dilution will affect the final area covered. Always keep out of reach of children and pets. Before applying, remove loose debris and wear appropriate safety gear: gloves, eye protection, a face mask, and protective clothing. Test the cleaner on an inconspicuous area first to check suitability, contact us for returns if unsuitable. Use undiluted for wax and coating removal, or dilute with water (up to 10 parts water to 1 part cleaner) for heavily soiled areas. Pre-wet the surface, apply, let dwell for 15-20 minutes (preventing drying), agitate with a stiff brush and clean water, then rinse thoroughly. For persistent soiling, repeat the process, increasing the amount of cleaner as needed.
StoneCare4U Essential Pro Ultra Cleaner - 2.5L - For Ceramic, Porcelain, Natural StoneFree delivery in 1–3 days£27.50Visit shop →
StoneCare4U Essential Pro Ultra Cleaner 5L - Professional Grade Stone & Ceramic CleanerFree delivery in 1–3 days£44.00Visit shop →
StoneCare4U - Essential Pro Ultra Cleaner - 5LFree delivery in 1–3 days£44.00Visit shop →
Product Information
Full details
Tackle tough dirt and coatings on various surfaces effortlessly using the StoneCare4U Ultra Cleaner Pro 2.5L. Ideal for use on ceramic, porcelain, and natural stone like marble and limestone, this professional-grade cleaner contains potent solvents and cleaning agents that effectively dissolve stubborn stains, wax layers, and grease. With coverage of up to 25m2 per litre, the dilution rate will determine the actual coverage area when using Essential Ultra Cleaner Pro. Warning: Keep out of the reach of children and pets. How to apply: Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, face mask and clothing. Certainly, we advise performing a small test application in an inconspicuous area on-site before use. This will indicate the suitability and effectiveness of the product for your surface. If unsuitable for your requirements, do not proceed but contact us to return the product. Depending on the stained or soiled area, Ultra Cleaner Pro can be used neat for removing waxes/coatings or diluted up to 10 parts water to 1 part for heavily soiled areas. Wet the area with clean water before applying the cleaner to the soiled area. Allow the cleaner to dwell for approximately 15 to 20 minutes, not allowing it to dry on the surface. After 15 to 20 minutes agitate with a stiff brush and clean water, scrub and rinse thoroughly with clean water. In cases of heavy soiling or staining, repeat the process increasing the amount of cleaner if necessary. Stonecare4U Ultra Cleaner Pro is a professional heavy-duty cleaner suitable for use on ceramic, porcelain and many other types of natural stone surfaces, including polished marble and limestone. It contains a combination of agents which are very effective in dissolving ingrained dirt, wax layers, grease and many other stains or coatings.Important note: Protect painted or varnished surfaces with a masking material prior to use as this product may cause damage to sensitive surfaces. Always test the product in an inconspicuous area prior to use. Remove stubborn dirt and coatings from ceramic, porcelain, marble, and limestone surfaces with ease using StoneCare4U Ultra Cleaner Pro 2.5L. Its powerful solvents and cleaning agents effectively dissolve grease, wax, and stubborn stains. Coverage is up to 25m² per litre, though dilution will affect the final area covered. Always keep out of reach of children and pets. Before applying, remove loose debris and wear appropriate safety gear: gloves, eye protection, a face mask, and protective clothing. Test the cleaner on an inconspicuous area first to check suitability, contact us for returns if unsuitable. Use undiluted for wax and coating removal, or dilute with water (up to 10 parts water to 1 part cleaner) for heavily soiled areas. Pre-wet the surface, apply, let dwell for 15-20 minutes (preventing drying), agitate with a stiff brush and clean water, then rinse thoroughly. For persistent soiling, repeat the process, increasing the amount of cleaner as needed.