Shopping.co.uk

TIMco Shield Anchor - Yellow - M12

TIMco Shield Anchor - Yellow - M12

Suitable for attaching a variety of fixings with metric threads such as hooks, eyes and studs. Com...

Best current price£18.54from Power Tools Direct

Best offers

Shopping.co.uk recommended and popular offers

All Offers

4 offers from £18.54 - £29.20

View price history by clicking the chart icon.

Power Tools DirectTimco Yellow 12Sh Shield Only - M12 Box 25
£5.95 delivery
£18.54
Visit shop
B&QB&Q - TimcoShield OnlyYellow (Size M1225 Pieces)
Free delivery in 1–3 days
£23.50
Visit shop
OnBuy.comTimco 12Sh Shield Anchor Zyp M12 Box Of 25 5055017563562
Free delivery in 1–3 days
£29.20
Visit shop

Product Information

Full details

The TIMco Shield Anchor (M12, Yellow) is designed for securely attaching metric-threaded fixings like hooks, eyes, and studs into concrete, brick, or stone. Its key benefit is providing a reliable, torque-controlled fixing solution for heavy-duty applications. A potential caveat is the requirement for specific drill hole sizes and minimum embedment depths for optimal performance.

All features

ColourYellow
Model Part Number12SH
BrandTimco

Extended Product Information

FAQs

What is the maximum load capacity of this anchor?

The load capacity depends on the base material (concrete, brick, stone), its condition, and the specific fixing used. Always consult the TIMco technical data or a structural engineer for specific load ratings.

Can I use this anchor in hollow brick or aerated concrete?

No, this shield anchor is designed for solid materials like concrete, solid brick, and solid stone. For hollow materials, different anchoring solutions are required.

What is the minimum distance from an edge or another anchor?

Refer to the product's technical datasheet or installation guide for recommended spacing from edges and other fixings. This is crucial for ensuring structural integrity.

Do I need a special tool to install it?

You will need a hammer drill with a `20.0mm` masonry bit to create the hole. A torque wrench is highly recommended for tightening the fixing to ensure proper expansion and load performance.

What is the function of the yellow finish?

The Zinc & Yellow finish provides a degree of corrosion resistance, protecting the carbon steel anchor from environmental degradation, especially in damp conditions.

Can I reuse this anchor if I remove the fixing?

No, shield anchors are typically single-use. Once the fixing is removed, the anchor may be damaged or loosened, and should be replaced for safety and reliability.

Troubleshooting

Anchor does not expand properly

Ensure the drill hole diameter and depth are correct as per specifications. Clean the hole thoroughly before insertion. Verify the fixing thread is correctly engaging with the anchor.

Fixing spins during tightening

The anchor may not be seated deeply enough or the hole might be too large. Remove the anchor, check hole dimensions, and re-insert, ensuring the minimum embedment depth is achieved.

Excessive force required for tightening

Check that the correct size fixing is being used and that it is aligned properly with the anchor. Ensure the base material is suitable and of sufficient thickness.

Corrosion observed on the anchor

While the Zinc & Yellow finish offers protection, extreme environments may require additional protective measures or specific anchor types designed for harsher conditions.

Pros and Cons

Pros

  • Offers a strong and reliable fixing in hard materials.
  • Torque control prevents over-tightening and ensures consistent results.
  • Zinc and Yellow finish provides good corrosion resistance.
  • Suitable for a broad range of common metric-threaded fixtures.
  • Three-segmented expansion ensures excellent holding power.

Cons

  • Requires precise drilling to the specified diameter and depth.
  • Not suitable for all material types (e.g., plasterboard, timber).
  • Minimum structure thickness of 150mm is required.
  • Shield-only design means the fixing component must be supplied separately.
  • Can be challenging to remove once fully set.

Setup, Compatibility & Care

Setup:

  1. Drill Hole: Drill a hole with a `20.0mm` diameter bit to a minimum depth of `85mm` in the base material (concrete, brick, stone).
  2. Clean Hole: Thoroughly clean the drilled hole to remove all dust and debris.
  3. Insert Anchor: Insert the M12 Shield Anchor (TIMco part number `12SH`) into the drilled hole until the collar is flush with the surface. Ensure the minimum embedment depth of `75mm` is met.
  4. Insert Fixing: Place the component with the `M12` threaded fixing onto the shield anchor.
  5. Tighten: Using a torque wrench set to the manufacturer's recommended torque for your specific fixture and base material, tighten the fixing. This will expand the shield anchor within the base material.

Compatibility:

  • Thread Type: Compatible with most types of `M12` metric threaded components (hooks, eyes, studs).
  • Base Materials: Suitable for use in concrete, solid brick, and solid stone.
  • Minimum Thickness: Base material must be at least `150mm` thick.

Care:

  • Ensure the anchor is fully protected from the elements if used in exterior applications, though the Zinc & Yellow finish offers good resistance.
  • Regularly inspect fixings in critical applications for any signs of stress or corrosion.

Price History

DatePrice
Visit shop