Best current price£16.99from eBay
Shopping.co.uk recommended and popular offers
eBay£16.99Visit shop 3x Bartoline Teak Oil Wood Furniture Sealer Protector Exterior Interior 500mL
Visit shop
B&Q£22.99Visit shop B&Q - 3X Teak Oil Wood Furniture Sealer Protector Exterior Interior 500Ml
Visit shop3 offers from £16.99 - £23.99
View price history by clicking the chart icon.
Bartoline Teak Oil is a specialized restorative treatment designed for homeowners and woodworkers looking to nourish and protect hardwood surfaces like Oak and Teak. It excels at replacing natural oils lost to weathering, resulting in a rich, traditional matte finish; however, users must be diligent about the safe disposal of oil-soaked cloths due to fire safety risks.
| Model Part Number | TK4940 |
|---|---|
| Brand | Bartoline |
This product is specifically formulated for hardwoods like Teak and Oak; it is not recommended for softwoods.
For best results, apply 2 to 3 coats, allowing 24 hours of drying time between each application.
Yes, if the wood has existing paint or stain, it must be removed via sanding to ensure the oil can penetrate the surface.
No, Bartoline Teak Oil provides a traditional matte finish.
Wash the cloths thoroughly in soapy water immediately after use and then dispose of them in an outdoor bin.
Yes, it is designed for garden furniture and helps protect against weathering, though re-application may be necessary depending on exposure levels.
This occurs if too much oil was applied. Wipe the surface with a clean cloth dampened with a small amount of White Spirit to remove excess oil.
The wood may not have been sanded evenly or cleaned properly. Lightly sand the affected area and apply an additional thin coat of oil.
To ensure optimal results, the surface must be completely clean and dry before starting. If the wood was previously painted or stained, you must sand the surface down to the raw wood. Clean the area with White Spirit to remove any lingering grease or dust. Apply the oil liberally using a brush or cloth, ensuring it is rubbed deep into the wood grain. After application, always wipe away excess oil to prevent surface buildup. Between coats, allow 24 hours of drying time. Crucially, all cloths used during the application process must be washed immediately in soapy water and disposed of outside to mitigate the risk of spontaneous combustion.
