Best current price£53.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£53.90Visit shop VEVOR Boat Flooring, EVA Foam Boat Decking 240 x 116.1 cm, Non-Slip Self-Adhesive Flooring, 2.78 m² Marine Carpet for Boats, Yacht, Pontoon, Kayak Decking
Visit shop1 offer from £53.90
View price history by clicking the chart icon.
The VEVOR Boat Flooring is an ideal solution for boat owners, yacht captains, and kayak enthusiasts seeking a durable, non-slip surface that balances comfort with performance. Crafted from premium EVA foam, this flooring provides excellent traction in wet conditions while shielding your deck from daily wear and tear. While its 3M adhesive backing ensures a straightforward installation, users should carefully measure their specific deck layout, as cutting the large 2400 x 1160 mm sheet requires precision for a professional finish.
| Model Part Number | NC-7 240*116 |
|---|---|
| Brand | VEVOR |
Yes, but for optimal adhesion, smooth surfaces are preferred. On rough textures, you may need a higher volume of adhesive or a primer.
Use a sharp utility knife and a straight edge. It is recommended to make a template using heavy paper first to ensure accuracy before cutting the EVA sheet.
Yes, the EVA foam is closed-cell, meaning it does not absorb water and is highly resistant to moisture.
The material is designed for marine environments and includes resistance to UV rays, though colors may fade slightly over many years of intense, direct exposure.
Yes, it can be removed by applying heat with a heat gun to soften the adhesive, though cleaning the residual glue from the deck will be required.
Clean the area thoroughly, re-apply a small amount of marine-grade contact adhesive, and apply pressure until cured.
Use a small needle to prick the center of the bubble and press the air out toward the edges; if it persists, ensure the surface underneath was adequately prepared.
The surface likely had residual wax or oil; remove the mat, clean the deck with a specialized solvent, and use a fresh piece of adhesive tape.
For a successful installation, ensure the mounting surface is thoroughly cleaned of oil, salt, and debris using a degreaser. The deck must be completely dry before applying the flooring. Use a sharp utility knife or heavy-duty scissors to cut the sheet to your desired dimensions before peeling the 3M backing. Once the adhesive is exposed, press the sheet firmly into place starting from one corner to avoid air bubbles. For care, use a mild soap and a soft-bristled brush to remove stubborn grime. Avoid using harsh chemicals or high-pressure power washers at close range, as these can damage the foam structure over time.
