Tiletastic Square Wood Effect Self-Adhesive Vinyl Floor Tiles - 5 Tiles - 5 Sqft

Each pack contains 5 tiles, and the total coverage is 5 square feet.

Each tile measures 30.5cm x 30.5cm (approximately 12 inches x 12 inches).

Yes, they are water-resistant and suitable for kitchens and bathrooms, especially in low-traffic areas. Ensure the surface is dry and clean for best adhesion.

No, these are self-adhesive tiles. The backing is designed to stick directly to a prepared surface without additional adhesive.

Yes, provided the existing floor tiles are smooth, flat, and the grout lines are filled and leveled. Any texture or unevenness will show through.

Wipe clean with a damp cloth and mild soap. Avoid abrasive cleaners or excessive moisture.

These tiles are best suited for areas with light to moderate foot traffic. Heavy traffic may cause premature wear.

They are designed for peel-and-stick application and are generally removable. For best results, gently heat the tile with a hairdryer to soften the adhesive before peeling. Some residue may remain, which can be cleaned with an appropriate adhesive remover.

Ensure the floor surface is perfectly clean, dry, and smooth. Remove any existing wax, polish, or loose material. Press down firmly after application, especially on edges.

Lift the tile immediately and reapply, smoothing out air pockets as you press down. Use a flat object like a credit card to help smooth the tile from the center outwards.

Use a sharp, heavy-duty utility knife and a straight edge (like a metal ruler). Score the tile multiple times along the cutting line before snapping or cutting through. Cut on a protective mat.

Ensure tiles are aligned correctly before sticking. If minor adjustments are needed, carefully lift and reposition immediately after placement. For significant misalignment, you may need to replace affected tiles.