Best current price£27.02from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£27.02Visit shop Floplast Grey Industrial/ Xtraflo Gutter Running Outlet - For 110Mm Downpipe 170Mm
Visit shop
B&Q£38.77Visit shop B&Q - Xtraflo Industrial Running Outlet 170mm Half-Round Gutter To 110mm Downpipe Grey
Visit shop3 offers from £27.02 - £38.77
View price history by clicking the chart icon.
The FloPlast Xtraflo Industrial Running Outlet is designed for contractors and DIY enthusiasts managing large-scale drainage systems who require a robust, high-capacity solution for connecting 170mm guttering to 110mm downpipes. Its primary benefit is the versatile 'tee' design that facilitates efficient water flow in both center and end-run configurations, though it requires specific attention to seal lubrication during installation to ensure long-term, leak-free performance.
| Model Part Number | ROX1G |
|---|---|
| Brand | FloPlast |
No, this outlet is specifically engineered for the 170mm Xtraflo industrial range.
No special tools are required beyond standard drilling equipment for mounting screws and a lubricant like SL40.
While not strictly mandatory, it is highly recommended to ensure seal integrity and ease of fitting during installation.
Use a short piece of guttering attached to the outlet and cap the end with an external stopend to extend the reach past the building wall.
This unit is compatible with 110mm round downpipes.
Ensure the pipe is pushed fully into the fitting. Apply additional SL40 silicon spray if the seal is resisting insertion.
Check that all mounting screws are properly seated in the pre-moulded holes and tightened into sound timber.
Installation of the Xtraflo Running Outlet is a straightforward process, but following these steps ensures system integrity. Begin by aligning the outlet with the downpipe position. Use the pre-moulded holes to fix the component firmly to the fascia board. Because this system relies on a push-fit connection, it is highly recommended to apply a light coating of `SL40` silicon spray to the internal seals before inserting the downpipe; this reduces friction and ensures a watertight fit that can accommodate thermal expansion. Regularly inspect the unit annually for debris buildup and verify that the fascia screws remain tight to prevent vibration or water leakage.
