Best current price£8.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£8.95Visit shop B&Q - Paint Mixer Drill Attachment 80 X 400mm Steel Mixing Paddle Hex Shank
Visit shop1 offer from £8.95
View price history by clicking the chart icon.
The KetoPlastics Paint Mixer Drill Attachment is designed for DIY enthusiasts and home renovators who need a consistent way to prepare paint, plaster, and textured coatings. By attaching directly to your power drill, this tool provides a fast, lump-free mixing process that far outperforms manual stirring, though users should be aware that it is strictly intended for lighter materials and is not suitable for heavy-duty applications like wet concrete or mortar.
| Model Part Number | Drill-Mixer-400 |
|---|---|
| Brand | KetoPlastics |
No. This tool is designed for paint, plaster, and lighter textured coatings. Using it for concrete or mortar can damage the tool or overheat your drill.
You need a power drill with a chuck capacity of at least 7 mm.
The maximum working speed is 600 RPM. Operating above this speed may cause excessive splashing or damage.
Clean it immediately after use by running it in a container of water or suitable solvent at low speed, then wipe it dry.
It features a powder-coated finish that provides excellent corrosion resistance, but it should still be kept dry when stored.
Ensure the chuck is fully tightened and that the hex shaft is seated as deeply as possible into the jaws.
Reduce your drill's speed and ensure the paddle blades are fully submerged before you trigger the motor.
You may be attempting to mix material that is too thick. This tool is not designed for heavy concrete or dense mortar; switch to a manual mixing tool for those applications.
To set up the attachment, insert the hexagonal shaft into your drill's chuck and tighten firmly to ensure no slippage occurs during operation. This tool is compatible with any standard corded or cordless drill that features a chuck size of 7 mm or greater.
Care instructions are straightforward: immediately clean the paddle after use to prevent material from hardening on the blades. Simply place the used paddle in a bucket of water or cleaning solvent and run the drill at a low speed for a few seconds to dislodge residue. Once clean, wipe the tool with a dry cloth to maintain its corrosion-resistant finish.
