Best current price£36.76from eBay
Shopping.co.uk recommended and popular offers
eBay£36.76Visit shop John Guest Speedfit White PVC Hose & Serv Valve 300mm X 15mm X 1/2 (Pack Of 2)
Visit shop
Debenhams£38.55Visit shop John Guest Unisex White Pvc Hose & Serv Valve 300Mm X 15Mm X 1/2 (Pack Of 2)
Visit shop3 offers from £36.76 - £38.87
View price history by clicking the chart icon.
This John Guest Speedfit flexible hose with an integrated service valve is designed for easily connecting male thread appliances like taps, particularly in bathroom basin and bath installations. Its white PVC material resists kinking and simplifies cleaning, offering a convenient alternative to hard piping. The key benefit is the integrated valve for quick water isolation during maintenance or emergencies, combined with push-fit technology for tool-free, flame-free installation. A potential caveat is its limitation to hot and cold water systems only.
| Model Part Number | Wflx37-H |
|---|---|
| Brand | John-Guest-Speedfit |
The hose is suitable for hot and cold water systems with a maximum operating pressure of 6 Bar and a maximum temperature of 65°C.
No, John Guest Speedfit products utilize push-fit technology, which is designed for tool-free installation. You only need to ensure the pipe is cut square.
This hose is compatible with copper pipe and Speedfit PEX and polybutylene plastic pipe. For plastic pipes, you must use the appropriate Speedfit pipe inserts.
Simply turn the handle on the service valve clockwise until it stops. This will shut off the water supply to the connected appliance.
The white PVC material is engineered to bend sharply without collapsing or restricting water flow, making installation easier and ensuring long-term performance.
No, this product is strictly designed and certified for hot and cold water systems only.
This John Guest Speedfit flexible hose is designed, manufactured, and assembled in the UK.
Ensure the pipe is cut square and inserted fully into the fitting. Check for debris on the pipe end or inside the fitting. If the issue persists, the fitting or pipe may be damaged, and replacement may be necessary.
Ensure the union nut is tightened correctly. Check the O-ring seal within the union nut for damage or debris. Do not overtighten, as this can damage the thread or seal.
Ensure the collet is pushed fully towards the fitting body when demounting. For insertion, make sure the pipe end is clean, square, and free of burrs. Using a small amount of silicone-based lubricant on the pipe end can sometimes help, but avoid petroleum-based lubricants.
Gently exercise the valve handle back and forth. Ensure there are no obstructions around the valve. If stiffness persists and is not resolved with gentle use, contact the manufacturer.
Setup:
Demounting:
Compatibility:
Care:
