Nanlite PavoTube II 15C RGB LED Tube Light 4-Light Kit - 2'

The internal battery provides over 2 hours of use at 100% brightness, up to 9.5 hours at 10% brightness, and approximately 14 hours at 1% brightness.

The PavoTube II 15C lights recharge significantly faster than the previous generation. A full recharge takes approximately 1 hour and 10 minutes less than older models.

Yes, the lights can run on external batteries with a D-Tap port using the optional CB-DT/DC adapter cable (sold separately).

The +/-150 green-magenta shift adjustment allows for fine-tuning the color balance to better match other light sources or achieve specific creative looks, especially useful when matching with practical lights.

The kit typically includes four PavoTube II 15C lights, four power adapters, four mounting clips, four safety wires, and a padded carry bag.

Yes, the lights feature 0-100% dimming control, allowing for precise adjustments to light intensity.

Yes, Nanlite plans to add new features and improvements through future firmware updates, which can typically be applied via USB-C.

Ensure the power adapter is securely connected to the light and a working power outlet. Check if the battery is charged or try operating via AC power. Press and hold the power button for a few seconds.

Verify that Bluetooth is enabled on your mobile device and that the light is powered on. Ensure the light is within Bluetooth range. Try restarting the light and the app. Check for app updates.

Recalibrate the light through the NANLINK app or on-board controls if available. Ensure firmware is up-to-date. Check for any physical obstructions or damage to the diffusion surface.

Confirm that the DMX cable is securely connected to the light's DMX port and the DMX controller. Verify the DMX address settings on both the light and the controller match. Ensure the DMX cable is functional.