Hb Body P360 2k HS Primer Acryl Aerosol Spray Filler Anticorrosive - White 400ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone using the Hb Body P360 2k HS Primer Acryl Aerosol Spray Filler. It's designed for automotive professionals and DIY enthusiasts seeking a high-quality, anticorrosive primer. The P360 provides excellent adhesion and leveling for a smooth finish, but proper surface preparation is crucial for optimal results.
All features
| Colour | White |
|---|---|
| Model Part Number | P360 |
| Brand | HB BODY |
Extended Product Information
FAQs
What surfaces can I use this primer on?
Hb Body P360 is designed for use on metal surfaces, particularly those with E-COAT finishes.
How many coats should I apply?
Apply 2-3 thin coats for optimal results. Allow each coat to dry before applying the next.
What is the recommended drying time?
Drying times can vary. Refer to the product label for specific drying times under different conditions.
Do I need to sand the surface before applying the primer?
If applying to E-COAT panels, sanding may not be necessary. However, ensure the surface is clean. If other surfaces, follow surface preparation guidelines.
What kind of topcoats can I use with this primer?
This primer is compatible with most automotive topcoats. Always consult the topcoat manufacturer's guidelines.
How should I store the aerosol can?
Store the can in a cool, dry place, away from direct sunlight and extreme temperatures.
What safety precautions should I take when using this primer?
Use in a well-ventilated area. Wear appropriate PPE, including a respirator, gloves, and eye protection.
Troubleshooting
Primer is not adhering properly.
Ensure the surface is properly cleaned and sanded before application. If using on E-COAT panels, sanding may not be necessary, but cleaning is essential.
Primer is running or sagging.
Apply in thin, even coats. Avoid applying too much primer in one go. Make sure to maintain the recommended distance from the surface.
Primer finish is uneven.
Ensure proper shaking of the aerosol can. Apply the primer in overlapping passes, maintaining a consistent distance from the surface.
Pros and Cons
Pros
- Excellent adhesion to E-COAT panels
- Effective anticorrosive properties
- Good absorption of overspray
- Provides outstanding results
Cons
- Requires proper surface preparation for optimal results
- Application requires controlled environment
- Aerosol cans need special disposal
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from contaminants. Lightly sand the area if necessary.
- Application: Shake the aerosol can vigorously before use. Apply in even coats, holding the can about 20-30cm from the surface.
- Drying Time: Allow the primer to dry completely before applying the topcoat. Drying times can vary depending on temperature and humidity (check the product label for specific instructions).
- Compatibility: This primer is compatible with most automotive topcoats. Always check the topcoat manufacturer's guidelines for compatibility.
- Storage: Store the aerosol can in a cool, dry place. Avoid extreme temperatures.
- Safety: Use in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including a respirator, gloves, and eye protection.