Makita DUC305PT2 Twin 18v / 36v LXT Cordless 30cm Chainsaw - 2 x 5.0ah
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Makita DUC305PT2 is a high-performance, cordless chainsaw for building and leisure tasks, powered by two 18V LXT batteries for 36V output. Its key benefit is the blend of cordless freedom with robust cutting power, though it requires two batteries to operate. Key features include variable speed, electric chain brake, and integrated clamping nuts for easier maintenance.
All features
| Model Part Number | DUC305PT2 |
|---|---|
| Brand | Makita |
Extended Product Information
FAQs
How long does the battery last?
Battery life varies significantly depending on the task, wood density, and battery capacity (e.g., 5.0Ah). For extended use, having spare charged batteries is recommended.
Can I use just one 18V battery?
No, the DUC305PT2 requires two 18V LXT batteries connected in series to achieve the necessary 36V for operation.
What is the recommended chain oil?
Use a dedicated bar and chain oil formulated for chainsaws. Ensure the oil is suitable for the ambient temperature you are operating in.
How do I adjust the chain tension?
Use the side chain tensioning knob located near the bar. Rotate the knob clockwise to tighten the chain and counter-clockwise to loosen it. Ensure the chain is snug but can still be rotated by hand.
What is the bar and chain oil capacity?
The chainsaw has a chain oil capacity of 200 ml (cm³).
Is this chainsaw suitable for professional logging?
While powerful, it is primarily designed for building and leisure activities. For heavy-duty professional logging, consider Makita's larger, gas-powered models or specialized cordless units.
Troubleshooting
Chainsaw will not start
Ensure both batteries are fully charged and correctly inserted. Check that the main power switch is in the 'ON' position and the lock-off lever is disengaged. Verify the battery cover is properly closed.
Chain not moving or moving slowly
Check battery charge levels. Ensure the chain is properly tensioned and not binding. Verify the chain brake is disengaged. Inspect the chain and bar for damage or excessive wear.
Chain oil not being dispensed
Check the oil level in the reservoir. Ensure the oil cap is securely fastened. Clean the oiler hole and ensure the oil is not too viscous for the current temperature. Inspect the oil pump for blockages.
Reduced cutting performance
Sharpen or replace the chain. Check chain tension; it should be snug but allow free rotation by hand. Ensure the bar groove is clean. Check for proper chain lubrication.
Pros and Cons
Pros
- Cordless freedom with powerful 36V equivalent performance.
- User-friendly features like side chain tensioning and captive nuts.
- Reduced operator fatigue due to lightweight and compact design.
- Enhanced safety with dual braking systems.
- Variable speed control for versatile use.
Cons
- Requires two 18V LXT batteries to operate (not included in all kits).
- Not compatible with Makita G-Series batteries.
- Cordless operation runtime is dependent on battery capacity.
- Noise and vibration levels, typical for chainsaws.
Setup, Compatibility & Care
Setup: To begin, ensure two fully charged Makita 18V LXT batteries are inserted into the battery housing, connecting them in series. Attach the guide bar and chain, ensuring correct tension. Fill the chain oil reservoir with bar and chain oil. The DUC305PT2 uses a 3/8" chain pitch and 0.043" gauge chain.
Compatibility: This chainsaw is compatible with all Makita 18V LXT Lithium-Ion batteries. It is *not* compatible with G-Series batteries. The included DC18RD charger can charge two 18V LXT batteries simultaneously.
Care: Regularly check chain tension and adjust as needed using the side tensioning knob. Keep the chain sharp for optimal performance and safety. Refill the chain oil reservoir when it gets low; an oil capacity display is integrated. Clean debris from around the motor and vents periodically. Store the chainsaw with the guide bar cover attached.