Best current price£125.95from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£125.95Visit shop Floplast And Clark-Drain Floplast Inspection Chamber Set Block Paving - 300Mm Diameter
Visit shop
B&Q£162.74Visit shop B&Q - 300mm Mini Inspection Chamber Set With 80mm Recessed Block Pavior Cover800mm Depth
Visit shop2 offers from £125.95 - £162.74
View price history by clicking the chart icon.
The FloPlast 300mm Mini Inspection Chamber Set is designed for professional landscapers and DIY enthusiasts looking for a durable, reliable solution for residential drainage systems. Its primary benefit is the adaptable, modular design that allows for precise depth adjustments, making it ideal for standard domestic driveways. However, users should note that while the riser sections are customizable, accurate measuring and careful cutting are required to ensure a watertight fit at the desired installation depth.
| Model Part Number | M300MH2 |
|---|---|
| Brand | FloPlast |
The cover is rated to 35kN, making it suitable for domestic driveway applications.
The set is designed for an overall installation depth of up to 800mm.
A fine-toothed hand saw is sufficient for cutting the plastic risers to size.
Yes, it features an 80mm recessed cover specifically designed to hold block paving or paving slabs.
No, the side inlets are sealed with integral blanking plugs that you can remove as needed to accommodate pipe connections.
Yes, the set includes two 200mm sectional risers.
Adjust the riser height by trimming with a fine-toothed saw or ensure the base is set level on a compacted sub-base.
Use a flat-head screwdriver to gently pry the edges of the plug from the inlet port, taking care not to damage the circular seal housing.
Verify that the riser is pushed fully home and that the rubber seals or seating gaskets are free from grit and debris before final assembly.
Before starting, ensure your excavation is deep enough to accommodate the base and the required height of the risers. If the 800mm maximum depth exceeds your needs, use a fine-toothed saw to carefully cut the sectional risers to your measured height, keeping the edges clean to ensure a snug seal with the frame. Always check that the base is set on a solid, level bed of pea shingle or concrete to prevent future movement. Periodic maintenance involves simply lifting the recessed cover using a key to clear any accumulated silt or debris from the main channel, ensuring the flow path remains clear and odor-free.
