Autotek Stone Guard - Black - 500ml
Best current price£29.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£29.99Visit shop Autotek Stone Black Guard Protects Against Chips Aerosol Spray Paint 500ml x6
Visit shopeBay£29.99Visit shop All Offers
2 offers from £29.99 - £30.99
View price history by clicking the chart icon.
eBayAutotek Stone Black Guard Protects Against Chips Aerosol Spray Paint 500ml x6
Free delivery in 1–3 days
£29.99
Visit shop
Autotek Stone Black Guard Protects Against Chips Aerosol Spray Paint 500ml x6Free delivery in 1–3 days£30.99Visit shop →
Product Information
Full details
The Autotek Stone Guard in Black (500ml) is designed for automotive professionals and DIY enthusiasts seeking to protect vulnerable vehicle body panels. Its key benefit is providing a highly flexible, rubberised coating that shields against stone chip damage and corrosion from minor scratches, particularly effective on sills and valances. A potential consideration is its application requires proper surface preparation for optimal adhesion.
All features
| Colour | Black |
|---|---|
| Model Part Number | ATOOSGB500 |
| Brand | Autotek |
| Container Volume | 500 |
Extended Product Information
FAQs
What is the primary purpose of Autotek Stone Guard?
Its primary purpose is to protect vulnerable automotive body panels, such as sills and valances, from stone chip damage and corrosion.
Can this product be painted over?
Yes, Autotek Stone Guard is typically designed to be painted over once fully cured, allowing you to match your vehicle's color.
How long does it take to dry?
Drying time can vary depending on temperature, humidity, and application thickness. Refer to the product packaging for specific drying and curing times.
Is this product suitable for all car parts?
It is ideal for lower body panels like sills and valances. Avoid using it on areas that require extreme flexibility or are not designed for textured coatings.
What is the weight of the product?
The product weighs 0.0 pounds according to the manufacturer's specifications.
How should I prepare the surface before applying?
The surface must be clean, dry, and free from grease, wax, and dirt. Light abrasion may be necessary for optimal adhesion.
What is the container volume?
The container volume is 500ml.
Troubleshooting
Uneven application or texture
Ensure the product is at the recommended temperature before application. Use consistent strokes or spray patterns. If necessary, allow to dry and apply a second, lighter coat for a uniform finish.
Coating not adhering properly
Verify that the surface was thoroughly cleaned, degreased, and dried before application. Ensure any existing paint or primer was in good condition. Re-prepare the surface and reapply.
Product appears too thick or too thin
Check the ambient temperature. Extreme cold can thicken the product, while extreme heat can thin it. Allow the product to reach room temperature. If spraying, ensure the correct nozzle size and pressure are used as per application instructions.
Pros and Cons
Pros
- Provides excellent protection against stone chips.
- Helps prevent corrosion on treated areas.
- The flexible coating adapts to temperature changes.
- Suitable for critical areas like sills and valances.
- Achieves a professional-looking finish.
Cons
- Requires thorough surface preparation for best results.
- Application may require specific tools (e.g., spray gun or brush) depending on desired finish.
- Drying time can vary based on environmental conditions.
Setup, Compatibility & Care
Setup:
- Ensure the application area is clean, dry, and free from grease, wax, and dirt. For best adhesion, lightly abrade the surface if necessary.
- Mask off surrounding areas to prevent overspray.
- Apply the Stone Guard evenly using a suitable applicator (e.g., brush, roller, or spray gun, following manufacturer recommendations for application method).
Compatibility:
This product is designed for use on bare metal, primed metal, and some plastic automotive body panels. It is not intended for use on flexible bumpers unless specified by the manufacturer or over existing paintwork that is not a primer.
Care:
Once cured, the applied coating is durable. Clean the treated areas with standard automotive cleaning products. Avoid abrasive cleaners or tools that could damage the protective layer. Ensure the product is stored in its original container in a cool, dry place, away from direct sunlight and extreme temperatures.