Gens Ace Li-Po 3S 11.1V 800mAh 45C - G3S0800-45B

Best current price£16.29from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£16.29Visit shop GENSACE Li-Po 3S 11.1V 800mAh 45C with BEC O-G3S0800-45B
Visit shop
Best current price£16.29from eBay
Shopping.co.uk recommended and popular offers
eBay£16.29Visit shop GENSACE Li-Po 3S 11.1V 800mAh 45C with BEC O-G3S0800-45B
Visit shop1 offer from £16.29
View price history by clicking the chart icon.
This Gens Ace Li-Po 3S 11.1V 800mAh 45C battery is designed for hobbyists using specific RC models like 410mm Eflite Mini Convergence VTOL, 250 class helicopters, 800mm Warbirds, and foam racers. Its key benefit is providing consistent power and a high discharge rate for demanding applications. A potential caveat is that its 800mAh capacity may be suitable for shorter flight times compared to larger capacity batteries, requiring users to monitor usage for extended operations.
| Series | Li-Po 3S |
|---|---|
| Model Part Number | G3S0800-45B |
| Brand | Gens ace |
'3S' refers to the number of cells in series, meaning this battery has three individual Lithium Polymer cells connected in series. This results in a nominal voltage of 11.1V (3.7V per cell).
The '45C' rating indicates the battery's discharge capability. It means the battery can safely deliver up to 45 times its capacity (800mAh x 45 = 36,000mA or 36A) continuously, allowing for high-current draw needed by powerful motors.
No, this 3S 11.1V battery is typically suited for more powerful RC applications like 250-class helicopters, certain airplanes, or rock crawlers. Most standard RC cars use 2S (7.4V) batteries. Always check your RC model's specifications for compatible battery voltage and size.
BEC stands for Battery Elimination Circuit. It's a component that steps down the battery's voltage to a lower, stable voltage (commonly 5V or 6V) required by your RC model's receiver and servos. Including it simplifies wiring by eliminating the need for a separate receiver battery.
Run time varies greatly depending on the demands of your RC model (motor efficiency, throttle usage, payload). For an 800mAh battery, expect shorter runtimes compared to higher capacity batteries, typically in the range of 5-15 minutes for most applications, but this is a general estimate.
No, you must use a charger specifically designed for Lithium Polymer (LiPo) batteries. LiPo chargers have different charging algorithms and safety features necessary for handling LiPo chemistry and preventing damage or fire hazards.
For short-term storage (less than a week), charge it fully. For long-term storage (over a week), discharge or charge it to its storage voltage (approximately 3.8V per cell). Store it in a cool, dry place, ideally in a LiPo-safe charging bag.
Ensure the charger is a LiPo-specific balance charger and is compatible with 3S batteries. Check that the battery is correctly connected to the charger, including balance leads. Verify the charger settings (cell count, capacity).
The battery may be nearing the end of its lifespan, or has been deeply discharged. Ensure cells are balanced after charging. Check for any physical damage or swelling. For persistent issues, consider replacing the battery.
Immediately stop using the battery. This indicates internal damage. Store it safely away from flammable materials in a LiPo-safe bag and dispose of it properly according to local regulations for hazardous waste.
Check the balance of the LiPo cells using your charger. If one cell is significantly lower or higher than others, it can cause issues. Ensure the battery is fully charged and balanced. If the problem persists, the battery may be failing.
Setup: Ensure your RC model is designed for a 3S (11.1V) LiPo battery and has a compatible connector. Connect the battery to your model's power system, paying attention to polarity. Always use a compatible LiPo balance charger to charge the battery. Monitor charging progress and disconnect once fully charged.
Compatibility: This battery is specifically recommended for models such as the 410mm Eflite Mini Convergence VTOL, 250 class helicopters, 800mm Warbirds, foam racers, EDF jets, and rockcrawlers. Always verify that the physical dimensions (58mm x 30mm x 23mm) and connector type of the battery match the requirements of your specific RC model.
Care: