Puig Brake Fluid Reservoir Cap - 9262P
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Puig Brake Fluid Reservoir Cap 9262P is an ideal upgrade for Honda CB600F Hornet owners seeking a blend of enhanced durability and refined aesthetics. This precision-engineered component replaces the stock cap to provide a sleek, custom appearance through its high-quality anodized silver finish and black base, though users should ensure their specific reservoir model matches the compatibility range of 1998 to 2016.
All features
| Model Part Number | 9262P |
|---|---|
| Brand | Puig |
Extended Product Information
FAQs
Is this cap compatible with all Honda motorcycles?
No, this specific model (9262P) is designed exclusively for the Honda CB600F Hornet (1998-2016).
Does the cap come with a new seal?
The cap is designed to reuse the original manufacturer's rubber diaphragm for a secure seal.
Will the silver finish fade over time?
The cap is anodized to resist fading, though direct prolonged exposure to extreme UV rays over many years can naturally affect any finish.
Can I use this on a clutch reservoir?
This cap is specifically dimensioned for the brake fluid reservoir; it may not fit clutch reservoirs of the same model.
What tools are needed for installation?
Generally, only hand-tightening is required; if necessary, use a soft cloth with pliers, but be very gentle to avoid scratching the anodized surface.
Troubleshooting
Difficulty threading the cap onto the reservoir
Back the cap off and restart the threading process slowly by hand to ensure the threads are not cross-threaded.
Slight fluid weeping around the cap base
Verify that the original rubber diaphragm is properly seated inside the new cap and that the threads are fully engaged.
Pros and Cons
Pros
- High-grade solid aluminum construction
- Sophisticated anodized finish
- Perfect compatibility with Honda CB600F Hornet
- Corrosion-resistant materials
Cons
- Specific to select Honda models only
- Silver finish may show dirt or fingerprints more than matte black
- Requires careful installation to avoid cross-threading
Setup, Compatibility & Care
Installation
- Ensure the motorcycle is on a stable stand and the handlebars are centered.
- Clean the area around the original brake reservoir thoroughly to prevent debris from entering the system.
- Carefully unscrew the original cap; take caution not to allow brake fluid to touch painted surfaces as it can cause damage.
- Ensure the original rubber seal (diaphragm) is intact and properly seated in the new Puig cap.
- Screw on the 9262P cap by hand first to ensure the threads are aligned, then tighten to the manufacturer's specified torque.
Compatibility
This part is compatible with Honda CB600F Hornet motorcycles produced between 1998 and 2016.
Care
To maintain the anodized finish, clean only with mild soap and water. Avoid using harsh chemicals, abrasive scouring pads, or high-pressure washers, which can dull the surface or damage the anodization.