Setup, Compatibility & Care Instructions
Setup:
- Ensure surfaces to be bonded are clean, dry, and free from dust, grease, or loose material.
- Puncture the tube seal using the nozzle provided or a suitable tool.
- Apply the adhesive in dabs or lines to one surface, depending on the size of the object.
- Position the object firmly onto the other surface within approximately 15 minutes of application.
- Apply pressure to ensure good contact. For heavy items, temporary support may be needed until the adhesive cures.
- Allow at least 24 hours for the adhesive to fully cure before subjecting the bond to significant stress or weather exposure.
Compatibility:
This adhesive is suitable for bonding wood, ceramic, tiles, cork, steel, stone, plaster, concrete, brick, glass, and most plastics. Always test on a small, inconspicuous area of plastic or painted surfaces first to ensure compatibility and avoid damage.
Care:
- Store tubes in a cool, dry place, away from direct sunlight and extreme temperatures.
- Seal opened tubes properly for future use, such as with a screw into the nozzle or plastic wrap.
- Clean up any excess uncured adhesive immediately with a damp cloth. Cured adhesive may require mechanical removal.
- Wear gloves during application. Avoid contact with skin and eyes.