Best current price£89.69from eBay
Shopping.co.uk recommended and popular offers
eBay£89.69Visit shop Lambda sensor Heated DOX-0537 DENSO for SUBARU FORESTER IMPREZA Saloon
Visit shopeBay£104.23Visit shop Lambda Sensor DOX-0537 Denso Oxygen 22641AA211 22641AA32A 22641AA450 22641AA490
Visit shop12 offers from £89.69 - £109.99
View price history by clicking the chart icon.
The Denso Oxygen Sensor (DOX-0537) is designed for automotive DIYers and professional mechanics looking to restore or maintain vehicle fuel efficiency and emission compliance. It provides the precision of original equipment (OE) technology to ensure your engine runs cleanly and effectively, though users must confirm the specific thread pitch and connector compatibility with their vehicle's diagnostic system before installation to ensure a proper fit.
| Model Part Number | DOX-0537 |
|---|---|
| Brand | Denso |
Yes, many Denso sensors come with thread compound applied to the threads for easier installation.
No, it must match the thread size (M18x1.5) and the 4-pin electrical connector configuration specified by your vehicle's manufacturer.
The DOX-0537 features a cable length of 790 mm.
While it varies by vehicle, sensors are typically inspected for performance degradation after 60,000 to 100,000 miles.
If your old sensor was faulty, replacing it with a functional Denso sensor often restores the intended air-fuel ratio, which can improve fuel efficiency.
An oxygen sensor socket is highly recommended to ensure proper torque and avoid damaging the sensor body.
Clear the diagnostic trouble codes (DTCs) using an OBD-II scanner after installing the new sensor.
Check the thread size (M18x1.5) and ensure no metal debris is stuck in the exhaust pipe threads before attempting installation.
Verify that the 4-pin connector is fully seated and that the wire harness has no nicks or breaks along the 790 mm length.
Before installation, ensure the engine is completely cool to prevent burns and to make the old sensor easier to remove. Always use a dedicated oxygen sensor socket to prevent stripping the threads. Check that the electrical harness is free of corrosion before plugging in the new 4-pin connector. Do not apply anti-seize to the sensor threads if the unit comes pre-coated with thread compound, as this can damage the sensor's sensitivity. Compatibility is strictly limited to vehicles requiring an M18x1.5 thread and 4-pin wiring setup; verify your vehicle's specific MPN requirements in the owner's manual before purchase.
