Maston Car-Rep Auto Spray Paint - Yellow - 400ml

Shake the can vigorously for at least two minutes to ensure the pigment and propellant are fully mixed.

Hold the can approximately 20-30 cm (8-12 inches) away from the surface for optimal application and to avoid runs.

Yes, it can be used on interior parts provided they are properly prepared and the area is well-ventilated during application and drying.

The paint has a shelf life of 60 months when stored correctly in a cool, dry place.

After each use, turn the can upside down and spray for a few seconds until only clear propellant comes out. This clears the valve and nozzle.

It is suitable for most automotive surfaces including primed metal, plastic, and existing paintwork, though testing on an inconspicuous area is recommended.

While it can be applied directly to some surfaces, using a compatible automotive primer will ensure better adhesion, durability, and a more uniform finish.

Ensure the can is shaken thoroughly before and during use. Clear the nozzle by inverting the can and spraying briefly. If clogging persists, use a suitable solvent to clean the nozzle tip.

Verify that the surface was properly cleaned, degreased, and primed before application. Ensure the surface was dry and free of contaminants.

Apply paint in thin, even coats rather than one thick coat. Maintain a consistent distance from the surface (typically 20-30 cm). Allow adequate drying time between coats.

Apply additional thin coats rather than attempting to achieve full coverage with a single heavy application. Ensure adequate product is being dispensed by shaking the can properly.