Best current price£23.32from eBay
Shopping.co.uk recommended and popular offers
eBay£23.32Visit shop Schneider Electric ICT remote Switch 1.2 W 250 V 25 A 1pc
Visit shopeBay£28.99Visit shop Schneider Acti 9 iCT 25a 4NO Contactor 25 Amp Four Pole NO 220/240v A9C20834
Visit shop13 offers from £23.32 - £117.11
View price history by clicking the chart icon.
4 offers from £24.68 - £42.32
View price history by clicking the chart icon.
The Schneider Electric Acti9 iCT Contactor (MPN: A9C20731) is designed for efficient remote control of electrical circuits in residential and commercial settings. It offers a reliable solution for managing HVAC systems, small motors, and control circuits, featuring a compact 18mm width for DIN rail mounting. While it provides a significant electrical lifespan, users should be aware of its specific AC-7a and AC-7b application ratings.
| Series | Acti9 iCT |
|---|---|
| Model Part Number | A9C20731 |
| Brand | Schneider Electric |
AC-7a is for 'Incidental control of loads which are resistive or semi-inductive'. AC-7b is for 'Control of motor loads'.
The contactor has an electrical lifespan of 100,000 cycles for AC-7A/AC-1 applications.
No, this contactor is specifically designed for AC circuits with a nominal operating voltage of 250 VAC and control voltage of 230-240 VAC.
It has a module width of 18mm, making it a compact component suitable for standard DIN rail installations.
It offers IP20 protection, meaning it is protected against solid objects greater than 12.5mm (like a finger) and is intended for use in enclosed environments.
The required control voltage for the coil is 230-240 VAC.
This contactor is rated for AC-7b (motor loads) at 8.5A. For larger motors, a contactor with a higher AC-7b rating would be necessary.
Verify that the control voltage is within the 230-240 VAC range and is correctly wired to the coil terminals (A1/A2). Check for any loose connections or damage to the coil.
Ensure the control voltage is removed from the coil. Check if the load current exceeds the rated AC-7a or AC-7b limits, which could cause excessive heat and sticking. Inspect for physical obstructions.
Confirm that the load current does not exceed the rated AC-7a (25A) or AC-7b (8.5A) limits. Ensure proper ventilation around the contactor in the enclosure.
Some operational hum is normal. However, loud buzzing or clicking may indicate a loose connection or a voltage fluctuation. Check control voltage stability.
Setup:
Compatibility:
Care:
