TP-Link VIGI 4MP Outdoor Full-Colour Wi-Fi Bullet Network Camera

Locate the reset button on the camera and hold it down for about 5-10 seconds until the camera restarts.

Yes, using the TP-Link VIGI app, you can remotely view live video and recordings from anywhere with an internet connection.

The camera supports on-board storage, and cloud storage options may be available depending on your subscription.

Please refer to the product documentation or contact TP-Link support for warranty details.

You can update the firmware through the TP-Link VIGI app. The app will notify you when updates are available.

ONVIF (Open Network Video Interface Forum) allows the camera to work with other security devices from different manufacturers.

Yes, the camera has a built-in microphone for audio recording.

The camera typically uses a standard power adapter that comes with the device.

Ensure the Wi-Fi network is operational, the password is correct, and the camera is within range of the router. Try moving the camera closer to the router or using a Wi-Fi extender.

Check the camera lens for dirt or obstructions. Adjust the video settings in the app. Ensure sufficient network bandwidth.

Ensure the camera is set to full-color mode. Check that the ambient light is low enough for the camera to switch to night vision mode. Check if the IR lights are enabled in the camera settings.

Verify that motion detection is enabled in the app settings, and notification settings are correctly configured. Check your phone's notification settings.

Make sure that the microphone and speaker are enabled in the app. Check the app volume settings.