Liberon Special Pale French Polish - 250ml

French polishing is a traditional woodworking technique used to produce a very high gloss, durable surface finish using shellac dissolved in alcohol. It involves applying many thin layers of the shellac mixture with a pad or mop.

While it can be used on dark wood, its pale, colorless nature is best suited for light to medium-toned woods where preserving the natural color is a priority. For dark woods, a different colored French polish or finish might be more appropriate.

Liberon Special Pale French Polish dries relatively quickly between coats, typically within 15-30 minutes, allowing for multiple applications in a single session. However, full curing can take several days.

It is not recommended to apply French polish directly over most modern varnishes or lacquers, as adhesion can be poor. It is best used on bare wood or surfaces that have been stripped back to bare wood or have been previously French polished.

The traditional method involves using a French polishing mop or a 'rubber' made from a soft cloth wrapped around a cork. Apply in thin, even coats with a circular or back-and-forth motion, allowing adequate drying time between layers.

Dust regularly with a soft, dry cloth. For minor cleaning, use a slightly damp cloth and dry immediately. Avoid harsh chemicals, abrasives, and prolonged exposure to moisture or heat.

No, this is a de-waxed pale shellac, meaning it has had the natural wax removed, which is crucial for achieving a clear finish and allowing subsequent layers to adhere properly.

Ensure the application surface is clean and free from dust. Apply thin, even coats using consistent strokes. If using the rubber technique, maintain consistent pressure and movement.

This may indicate moisture contamination or insufficient de-waxing of the shellac. Ensure tools and cloths are dry. If the issue persists, the surface may need to be stripped and refinished.

Drying time can be affected by humidity and temperature. Ensure application in a well-ventilated area with moderate temperature. Avoid applying excessively thick coats, as this will increase drying time.

This is often caused by too much polish being applied too quickly or not enough drying time between coats. Apply thinner coats and allow adequate drying time for each layer.