Best current price£6.40from Tweeks Cycles
Shopping.co.uk recommended and popular offers
Tweeks Cycles£6.40Visit shop Peaty's Holeshot BioFibre Tubeless Tyre Sealant - 120ml
Visit shop
eBay£9.20Visit shop Peatys Holeshot Biofibre Tubeless Tyre Sealant, Fast Acting Puncture Repair, ...
Visit shop31 offers from £6.40 - £124.99
View price history by clicking the chart icon.
This guide is for cyclists looking to understand and effectively use Peaty's Holeshot BioFibre Tubeless Tyre Sealant. It provides a fast and strong seal for punctures up to 6mm, ensuring a smoother ride. However, it's important to note that sealant effectiveness can vary depending on the tire and environmental conditions. This sealant is designed to quickly seal holes and tears, compatible with CO2, and effective across a wide temperature range.
| Model Part Number | Peatys Holeshot BioFibre Tubeless Tyre Sealant |
|---|---|
| Brand | Peaty's |
The amount varies based on tire size. Refer to the product packaging for specific recommendations.
Up to 6 months in the tire under temperate conditions, but this can vary depending on climate and riding conditions.
Yes, it is compatible with CO2 inflation systems.
It is compatible with most tubeless and tubeless-ready tires. Always check the tire manufacturer's recommendations.
Remove the valve core, inject the sealant, and then re-inflate the tire.
Use water. The sealant is water-based and washes out easily.
The operating temperature range is -20°C to +50°C.
It's primarily designed for punctures on the tread, but it may help with small sidewall cuts. Larger cuts might require a tire plug or replacement.
Ensure the puncture is within the 6mm range. Rotate the wheel to allow sealant to reach the puncture. If the hole is too large, you may need a tire plug or a new tire.
Check for leaks. Consider adding more sealant, especially if the climate is hot and dry.
Remove the valve core and clean it. Replace the valve core if needed.
Ensure the tire is properly seated on the rim. Add more sealant, and inflate to the maximum recommended pressure to help seat the tire beads. If this does not work, it might be due to a rim or tire issue.
To set up, first ensure your tires are tubeless-ready. Clean the tire and rim thoroughly before installing the tire. Install your tire onto the rim, add the sealant through the valve stem (after removing the valve core), and inflate the tire to the recommended pressure. Compatible with most tubeless-ready tires and rims. Regularly check your tire pressure and add more sealant every 3-6 months, or as needed, to maintain optimal sealing performance. Store the sealant in a cool, dry place away from direct sunlight. Ensure proper disposal of empty containers according to local regulations.
