Best current price£8.88from Autodoc
Shopping.co.uk recommended and popular offers
Autodoc£8.88Visit shop MAHLE ORIGINAL Oil filter VW,AUDI,MERCEDES-BENZ OC 26 905411880009,905411880009,12028495 Engine oil filter 9709001100,9712540103,905411880009,1839105
Visit shop11 offers from £8.88 - £22.33
View price history by clicking the chart icon.
This Mahle OC26 oil filter is designed for automotive enthusiasts and mechanics seeking reliable engine protection and optimal performance. Its key benefit is superior filtration to keep engine oil clean, extending engine life. A potential caveat is the specific tightening torque required, which needs careful adherence to prevent leaks or damage. This spin-on filter features durable construction, an anti-return valve, and an overflow valve for consistent oil flow under various conditions.
| Model Part Number | OC26 |
|---|---|
| Brand | Mahle |
The anti-return valve prevents engine oil from draining back into the oil pan when the engine is off. This ensures that oil is immediately available to lubricate engine components upon startup, reducing wear.
The overflow valve (also known as a bypass valve) opens if the oil filter becomes clogged or if the oil is too thick to pass through the filter media (e.g., in cold weather). This ensures that the engine continues to receive lubrication, albeit unfiltered, preventing catastrophic engine damage.
The recommended tightening torque for the Mahle OC26 oil filter is 20 Nm.
You should replace the Mahle OC26 oil filter according to your vehicle manufacturer's recommended service interval, typically between 5,000 and 10,000 miles, or when performing an oil change.
The recommended special tool for the Mahle OC26 oil filter is OCS 2.
No, this filter has specific compatibility requirements. You must verify that the part number OC26 is listed as compatible with your vehicle's make, model, and year before installation.
The filter has a height of 151.0 mm, a diameter of 93.2 mm, and a seal diameter of 62.0 mm (secondary diameter of 72.0 mm).
Ensure the filter is tightened to the specified torque (20 Nm) and that the gasket is properly seated and lubricated. Check that the engine's filter mounting surface is clean and free of debris.
Verify the oil level is correct. Ensure the new filter was installed correctly and that the anti-return valve is functioning. Check for any blockages or Kinks in the oil system.
Use a high-quality oil filter wrench or the recommended special tool OCS 2. Ensure you are turning it in the correct counter-clockwise direction.
Setup:
Compatibility:
This filter is compatible with numerous part numbers from brands including A.L. FILTER, A.P., ACDelco, ALCO FILTERS, AMC Filter, and BALDWIN. Always verify the fitment for your specific vehicle make, model, and year using a reliable parts catalog or by consulting your vehicle's owner's manual before purchase.
Care:
Oil filters are designed for single use and should be replaced at recommended service intervals, typically every 5,000 to 10,000 miles or as specified by your vehicle manufacturer. Do not attempt to clean or reuse a used oil filter.
