Best current price£250.00from eBay
Shopping.co.uk recommended and popular offers
eBay£250.00Visit shop SRAM Maven Ultimate B1 Disc Brake (Front) Hydraulic, Carbon Lever Blade, MTB
Visit shop
Team Cycles£275.50Visit shop Sram Unisex Silver Maven Ultimate B1 Rear 2000Mm Disc Brake
Visit shop7 offers from £250.00 - £275.50
View price history by clicking the chart icon.
The SRAM Maven Ultimate B1 Disc Brake is engineered for gravity mountain bikers who demand maximum stopping power and precise control on challenging descents. Its key benefit is exceptional braking performance with smooth modulation, reducing hand fatigue on long, technical rides. A minor caveat is that disc rotors are not included, requiring a separate purchase. This hydraulic brake system features a robust 4-piston caliper with large phenolic pistons for superior heat management and consistent performance, complemented by a redesigned SwingLink architecture for enhanced power delivery and adjustability.
| Series | Maven Ultimate B1 |
|---|---|
| Model Part Number | DBS8259001 |
| Brand | SRAM |
The primary advantage is its exceptional braking power and smooth modulation, designed specifically for demanding gravity mountain biking, which translates to better control and reduced hand fatigue.
No, disc rotors are not included with the SRAM Maven Ultimate B1 Disc Brake and must be purchased separately.
The SRAM Maven Ultimate B1 uses SRAM's proprietary mineral oil-based brake fluid.
Yes, the Ultimate version features tool-free Reach Adjust and Contact Point Adjust for quick and easy personalization of lever feel.
The four large 18mm phenolic pistons provide excellent heat management and consistent braking performance even under heavy loads and prolonged use, preventing brake fade.
Clean rotors and calipers with isopropyl alcohol. Inspect and replace pads as needed. Periodically check fluid levels and bleed the system if performance degrades. Avoid harsh solvents.
SRAM recommends using their HS2 disc rotors for optimal performance with the Maven brakes.
The brake system likely needs to be bled. Follow SRAM's official bleeding procedure using the correct mineral oil and bleed kit.
Ensure rotors are clean and free of contamination. Check pad alignment and bed-in the new pads and rotors correctly. Worn pads can also cause noise.
Check brake pad wear and replace if necessary. Ensure the rotor is clean and true. Verify that the brake fluid level is adequate and that there are no air bubbles in the system.
Check for any obstructions or binding in the lever mechanism. Ensure the brake hose is not kinked or pinched. Verify proper installation of the lever assembly.
Ensure you are using compatible high-performance rotors like SRAM HS2. Check that the brake pads are not excessively worn and that the system is properly bled. Consider larger rotors if applicable to your frame.
Setup: The SRAM Maven Ultimate B1 is designed for direct mounting and is compatible with SRAM's MMX clamp system for handlebar integration. Ensure you have the correct brake mount type (often Post Mount with an adapter or Direct Mount depending on your frame). The hydraulic hose length (2000mm for rear, 950mm for front available separately) should be trimmed to your frame's requirements before installation. Bleeding the system requires SRAM's bleed kit and mineral oil. Rotor installation requires specific tools and torque settings.
Compatibility: This brake is optimized for use with SRAM's HS2 disc rotors, which are recommended for best performance. It is compatible with most modern mountain bike frames and forks designed for hydraulic disc brakes. The lever is designed to integrate with SRAM shifters and dropper post levers using the included MMX clamp or a separate MatchMaker X clamp.
Care: Regularly clean the caliper and rotor with isopropyl alcohol to remove contaminants. Inspect brake pads for wear and replace as needed with the specified steel-backed organic pads. Periodically check brake fluid levels and perform a bleed if the lever feel becomes spongy or if the brakes feel less powerful. Store the bike in a clean, dry environment. Avoid exposing the brake system to harsh solvents.
