Woodside Solar Powered Oxygenator Pond Water Oxygen Pump - 2 Air Stones

The solar panel converts sunlight into electricity, which powers the pump to push air through the tubing and into the air stones, releasing oxygen into the water.

It is recommended to clean the air stones every few weeks or as needed, depending on the pond's condition. Debris build-up can reduce the efficiency of the oxygenator.

If your pond is heavily shaded, the oxygenator's performance will be reduced. You may need to supplement with an additional aeration method, or consider relocating the solar panel to a sunnier location if possible.

This oxygenator is designed for ponds. The air stones need to be submerged in water to function properly; therefore, it is not suitable for use in a fountain unless the fountain has a pond-like environment.

The maximum flow rate is 180L per hour.

The air stones are 3cm x 3cm.

The cable is 3m and the tubing is 2m.

Check the solar panel for sunlight exposure. Ensure the connections are secure. Clean the solar panel to remove any dirt or debris.

Inspect the air stones for blockages and clean or replace them. Check the tubing for kinks or damage. Ensure the pump is correctly connected.

Check the tubing and air stones for blockages. Make sure the pump is correctly connected and receiving sufficient sunlight.