EarthQuaker Devices Silos Multi-Generational Time Reflection Effects Pedal

The EarthQuaker Devices Silos Multi-Generational Time Reflection Device merges a digital, analog, ...

Best current price£202.49from eBay

One Offer

1 offer from £202.49

View price history by clicking the chart icon.

eBayEarthQuaker Devices Silos Multi-Generational Time Reflection Effects Pedal
Free delivery in 1–3 days
£202.49
Visit shop

Product Information

Full details

The EarthQuaker Devices Silos is designed for guitarists and bassists seeking versatile, multi-generational delay effects in a single, pedalboard-friendly unit. Its key benefit is combining digital, analog, and tape delay sounds, offering extensive sonic customization. A potential caveat is the learning curve associated with mastering its three distinct delay modes and preset management.

All features

Model Part NumberSilos
BrandEarthQuaker Devices

Extended Product Information

FAQs

Can I use the Silos with both guitar and bass?

Yes, the EarthQuaker Devices Silos is designed to work effectively with both guitar and bass signals.

What type of power supply does the Silos require?

The Silos requires a standard 9-volt DC power supply with a center negative polarity and a current draw of at least 150mA.

How many presets can I save on the Silos?

The Silos features six user-assignable preset slots where you can save your favorite settings.

What is the maximum delay time available?

Each of the three delay modes offers up to one second (1000 milliseconds) of delay time.

Can I control parameters like feedback or delay time with an expression pedal?

Yes, the Silos features an expression jack that allows user-assignable control over various parameters, including feedback and delay time. The specific assignment can be saved within presets.

How do I switch between Live mode and Preset mode?

Press the Save/Recall switch once to toggle between Live mode (controls are active, LED may be a different color or off) and Preset mode (saved presets are recalled, LED indicates Preset mode). Repeated presses cycle through the modes.

Does the Silos have stereo outputs?

No, the EarthQuaker Devices Silos is a monaural (mono) effects pedal and features a single output.

Troubleshooting

No sound when pedal is engaged.

Check that the power supply is connected and providing sufficient current. Verify that instrument cables are securely plugged into the correct input and output jacks. Ensure the effect is not bypassed (check the LED status).

Excessive noise or hum.

Try a different power supply, preferably a regulated one, to rule out power noise. Ensure all audio cables are in good condition and properly shielded. Check for interference from other electronic devices.

Tap tempo is inaccurate.

Ensure you are tapping the Save/Recall switch at a consistent tempo. If using Preset mode, make sure the controls are set as intended for the selected preset. Recalibrate your tapping speed to match the desired tempo.

Presets are not saving or recalling correctly.

Confirm you are in Live mode (default) when saving. Ensure you have pressed and held the Save/Recall switch until the LED blinks before selecting a preset slot. When recalling, ensure you have switched to Preset mode by pressing the Save/Recall switch once.

Pros and Cons

Pros

  • Consolidates three distinct delay types into one pedal, saving space.
  • Highly customizable with tap tempo, expression control, and presets.
  • Each delay mode offers a unique sonic character suitable for various musical styles.
  • Durable construction typical of EarthQuaker Devices pedals.
  • Intuitive controls when operating in Live mode.

Cons

  • The nuanced differences between modes might require time to fully appreciate and utilize.
  • Preset management, while powerful, can have a slight learning curve.
  • Maximum delay time is limited to one second, which might be insufficient for very long echo effects.
  • No dedicated stereo output.

Setup, Compatibility & Care

Setup:

  1. Connect a standard 9-volt DC power supply (center negative, at least 150mA) to the power jack.
  2. Connect your instrument's output to the INPUT jack and the pedal's OUTPUT jack to your amplifier or the next pedal in your signal chain.
  3. Use the footswitch to engage or bypass the effect. The LED indicates when the effect is active.
  4. To save a preset, adjust controls to your desired sound, press and hold the Save/Recall switch until the LED blinks, then press one of the six preset locations (indicated by foot switches).
  5. To recall a preset, press the Save/Recall switch to enter Preset mode (LED color changes), then tap the desired preset footswitch.

Compatibility:

  • The Silos is a monaural (mono) pedal and is compatible with standard mono instrument cables.
  • It functions with both guitar and bass signals.
  • It is compatible with most standard 9-volt DC power supplies. Always ensure your power supply meets the current and polarity requirements to avoid damage.

Care:

  • Keep the pedal away from excessive moisture and extreme temperatures.
  • Clean the exterior with a dry or slightly damp cloth. Avoid abrasive cleaners.
  • Ensure all connections are secure to prevent signal loss or noise.

Price History

DatePrice
Visit shop