DeWalt Multi Material Drill Bit 8mm x 134mm - DT6522-QZ

You can drill wood, plastics, mild steel, non-ferrous metals, and masonry.

The non-slip shank ensures a secure grip in the drill chuck, preventing slippage and improving control while drilling.

Yes, these bits are suitable for use in both rotary and percussion (hammer drill) modes.

Clean the bits with a brush or cloth to remove debris after each use. Avoid using harsh chemicals.

The lifespan of the drill bits depends on the materials being drilled and the frequency of use. Proper care and technique will extend their life.

The tip grind angle is 120 degrees, which is designed for optimal sharpness and efficient drilling.

Yes, these drill bits are particularly useful for drilling near edges and corners due to their design.

Ensure the bit is correctly inserted and tightened in the drill chuck. Make sure the clamping surfaces of the shank are clean and free of debris.

Check the sharpness of the bit. Apply consistent pressure, and ensure you are using the correct drilling mode for the material.

Reduce the drilling speed and/or apply cutting fluid if drilling into metal. Allow the bit to cool down periodically.