Mercury Speaker Cable - White

'Fig 8' refers to the cable's cross-sectional shape, where the two insulated conductors are joined by a thin web of insulation, resembling the number 8 laid on its side. This design often includes a visible line or ridge on one conductor to indicate polarity.

CCA stands for Copper Clad Aluminium. This means the aluminium conductors are coated with a thin layer of copper. It offers a lighter and often cheaper alternative to pure copper but has higher electrical resistance.

Yes, this cable is suitable for basic home theater systems, especially for rear surround speakers or in situations where the cable runs are relatively short and budget is a primary concern.

While specific recommendations vary, for CCA cables, it's generally advisable to keep runs under 50 feet (approx. 15 meters) to minimize potential signal loss. For critical listening or longer runs, pure copper is often preferred.

Look for the raised line or ridge on one of the two inner conductors. This conductor is typically marked as positive (+). Connect this marked conductor to the red (+) terminal on your amplifier and speaker, and the unmarked conductor to the black (-) terminal.

This economy cable is not specifically designed for outdoor or in-wall burial applications, which typically require specialized, UV-resistant, or outdoor-rated cables. It is best suited for indoor use.

Check that both ends of the cable are securely connected to the correct polarity terminals (+) and (-) on both the amplifier and the speaker. Ensure the cable is not damaged.

Verify that the cable is not pinched or damaged. Ensure the connections are clean and tight. For very long runs, consider a thicker gauge or pure copper cable if signal degradation is suspected.

Ensure the cable is not running parallel and close to power cables. Check that all connections are secure, as loose connections can cause interference.