kenable XLR 3 Pin Socket to 6.35mm Male Stereo Jack Plug Balanced Cable - Black

A balanced cable helps to reduce noise and interference by using a three-wire configuration. This results in a cleaner audio signal, particularly over longer cable runs.

While the cable can technically be used, it's designed for balanced connections. Using it for unbalanced connections may not provide the same benefits and could potentially degrade the signal.

The cable is 1 meter long.

It has an XLR 3-pin female connector on one end and a 6.35mm (1/4 inch) male stereo jack plug on the other.

Yes, it is designed to be plug and play, requiring no additional setup.

The cable features pure copper conductors and nickel-plated connectors.

The product information does not specify the warranty duration.

The cable is made in China.

Check all connections to make sure they are secure. Verify that the input and output levels on your devices are properly set. Test the cable with a different device to rule out a faulty cable.

Ensure the cable is securely connected at both ends. Check for ground loops in your setup. Try using a different power outlet or isolating the power supply for your devices.

Inspect the connectors for any damage. Try wiggling the connectors to see if the signal is restored, indicating a loose connection. Replace the cable if necessary.