Best current price£54.64from B&Q
Shopping.co.uk recommended and popular offers
B&Q£54.64Visit shop B&Q - 1/2" X 20 Unf Imperial Tap Repair Cutter Kit Helicoil Damaged Threads 14Pc Kit
Visit shop2 offers from £54.64
View price history by clicking the chart icon.
This 14-piece kit from AB Tools is designed for professionals and serious DIYers needing to repair or create stronger internal threads in soft materials, specifically for 1/2" x 20 UNF applications. Its key benefit is providing a permanent, robust solution for worn or damaged threads, significantly extending the life of components. A potential caveat is the specific thread size (UNF), limiting its use to compatible applications.
| Model Part Number | UN023 |
|---|---|
| Brand | AB Tools |
UNF stands for Unified National Fine, which refers to a specific thread standard for fasteners characterized by a finer thread pitch compared to UNC (Unified National Coarse) threads for the same diameter.
UNF threads have more threads per inch (TPI) for a given diameter, making them finer and generally stronger in thin materials or under vibration, while UNC threads are coarser and more robust for general-purpose applications.
No, this kit is specifically designed for Imperial UNF thread sizes (1/2" x 20 TPI). It cannot be used for metric threads.
The kit is best suited for soft materials such as aluminum, cast iron, brass, and mild steel. It creates a stronger internal thread in these materials.
The kit includes 10 inserts, each with a thread length of 13mm.
The lug breaking tool is used to snap off the small tang or lug at the bottom of the insert after it has been installed, creating a flush finish.
While the kit provides the necessary tools, detailed step-by-step instructions are not typically included. However, the product description and general knowledge of thread repair provide guidance, and this guide offers detailed steps.
Ensure the pilot hole was drilled to the correct size and the new threads were tapped cleanly. Check for any debris in the tapped hole or on the insert.
Ensure the tool is positioned correctly over the collar and apply firm, steady pressure. If the collar is too thin, it may not break cleanly.
Verify that the material being worked on is suitable for thread inserts and that the tapping process was performed correctly. Ensure the correct size tap and insert were used.
Ensure the drill bit is sharp and the correct speed is used for the material. Use cutting fluid if necessary.
Setup:
Compatibility: This kit is specifically designed for 1/2" x 20 UNF (Unified National Fine) imperial thread sizes. It is most effective in soft materials such as aluminum, cast iron, brass, and mild steel.
Care:
