Klein Tools 51607 Aluminum Conduit Bender - 3/4-Inch EMT
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Klein Tools 51607 Aluminum Conduit Bender is designed for electricians and contractors seeking efficiency and accuracy in conduit bending. Its key benefit is the Angle Setter technology, which ensures repeatable, precise bends for common angles with minimal effort, saving significant time on job sites. A potential caveat is its specific compatibility with 3/4-inch EMT and 1/2-inch Rigid/IMC conduit, requiring users to confirm it meets their project needs. This bender features a lightweight aluminum head, clear cast markings, and a stable foot pedal for enhanced control and comfort during use.
All features
| Model Part Number | 51607 |
|---|---|
| Brand | KLEIN TOOLS |
Extended Product Information
FAQs
What types and sizes of conduit can this bender be used with?
This bender is designed for 3/4-inch EMT (Electrical Metallic Tubing) and 1/2-inch Rigid and IMC (Intermediate Metal Conduit).
What is the Angle Setter technology?
The patent-pending Angle Setter technology helps achieve repeatable, accurate bends at specific angles (10, 22.5, 30, and 45 degrees) by providing visual guides and accounting for conduit spring back. For automated stops, it is compatible with Klein's 3/4-Inch Angle Setter accessory.
Does the Angle Setter accessory come with the bender?
No, the 3/4-Inch Angle Setter accessory (Cat. No. 51612) is sold separately. It is compatible with this bender for enhanced accuracy and speed.
How do I make saddle bends or back-to-back bends?
The bender features bold cast markings and symbols specifically designed to aid in the alignment and execution of various bend types, including saddle and back-to-back bends. Align the conduit carefully using these markings.
Is the aluminum head durable?
Yes, the aluminum head is reinforced for added strength and designed for easy handling, contributing to its durability for standard electrical work.
How should I maintain the bender?
Clean the bender after each use with a dry or slightly damp cloth, paying attention to the bending channel and markings. Store it in a dry environment to prevent corrosion.
What is the weight of the bender?
The product is listed with a weight of 5.12 pounds (2.32 kg).
Troubleshooting
Conduit not bending cleanly
Ensure the conduit is correctly seated in the bender's channel and aligned with the appropriate marking. Verify the interior hook surface is clear of debris. Check that the conduit is within the specified size compatibility (3/4-inch EMT, 1/2-inch Rigid/IMC).
Inconsistent bend angles
Confirm that the Angle Setter technology (if used) is properly engaged. Re-align the conduit precisely with the desired degree marking. Account for conduit spring back, which the Angle Setter settings are designed to do, but manual adjustments may be needed for specific materials.
Bender feels unstable during use
Ensure the bender is placed on a stable, level surface. Utilize the wide foot pedal for maximum stability and leverage. Avoid over-extending your reach, which can compromise balance.
Markings are difficult to read
Clean the cast markings with a dry cloth. Ensure adequate lighting in the work area. If markings are significantly worn, consider using a permanent marker to enhance visibility, or refer to the Angle Setter accessory for precise angle guidance.
Pros and Cons
Pros
- Significantly reduces setup time with Angle Setter technology.
- Ensures consistent and accurate bends, minimizing rework.
- Lightweight aluminum construction aids in portability and handling.
- Durable design with reinforced head for extended tool life.
- Clear markings and stable foot pedal enhance user control and efficiency.
Cons
- Primarily designed for 3/4-inch EMT and 1/2-inch Rigid/IMC conduit; may not suit all conduit sizes or types.
- Angle Setter accessory (sold separately) is required for optimal consistent bends.
- Aluminum construction might be perceived as less robust than steel by some users for heavy-duty applications.
- Limited to specific angles supported by the Angle Setter technology for automated precision.
Setup, Compatibility & Care
Setup: The bender comes fully assembled. Ensure the conduit is properly seated in the bender's channel and aligned with the desired marking. For enhanced accuracy with specific angles (10, 22.5, 30, 45 degrees), align the conduit with the corresponding markings and utilize the patent-pending Angle Setter if attached.
Compatibility: This bender is designed for 3/4-inch EMT (Electrical Metallic Tubing) and 1/2-inch Rigid and IMC (Intermediate Metal Conduit). It is compatible with Klein's 3/4-Inch Angle Setter accessory (Cat. No. 51612) for automated angle stops.
Care: After use, clean any dirt or debris from the bender, particularly from the bending channel and markings, using a dry or slightly damp cloth. Store the bender in a dry location to prevent corrosion. Periodically check the aluminum head for any signs of damage and ensure the foot pedal remains free of obstruction. Lubrication is generally not required for the aluminum components.