Best current price£12.99from eBay
Shopping.co.uk recommended and popular offers
eBay£12.99Visit shop Hycote Spray Paint Double Acrylic Rover Russet Brown 150ml + Red Primer Kit
Visit shop3 offers from £12.99 - £13.99
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and automotive restoration projects requiring a specific Rover Russet Brown finish. The key benefit is achieving a factory-matched, durable, and fast-drying color with excellent coverage in a convenient 150ml can. A potential caveat is that this is a concentrated formula, so always test spray patterns in an inconspicuous area first.
| Colour | Brown |
|---|---|
| Model Part Number | HYCPPGKIT83 |
| Brand | Hycote |
| Container Volume | 150ml |
The 150ml concentrated formula provides the same coverage as a conventional 300ml aerosol can.
This paint is designed for primed surfaces. While it adheres well to primed surfaces, testing on a small, hidden area of the plastic is recommended to ensure compatibility and adhesion. Using a plastic primer first is advisable.
The paint is fast drying. It typically dries to the touch within a short period, but full curing time will depend on environmental conditions such as temperature and humidity. Refer to product instructions for specific recoat times.
Store the can in a cool, dry place, away from direct sunlight, heat sources, and open flames. Ensure the nozzle is clear after use.
Yes, the paint offers excellent resistance to sunlight and color fading, making it suitable for exterior applications where durability and color retention are important.
After use, turn the can upside down and press the nozzle for a few seconds to spray clear propellant. This prevents the nozzle from clogging for future use.
Ensure the can is shaken thoroughly for at least two minutes before and during use. Check that the nozzle is not blocked. Try clearing the nozzle by turning the can upside down and spraying briefly. Test spray on a scrap surface.
The surface may not have been properly prepared. Ensure the surface is clean, dry, and free from contaminants like grease or wax. For best adhesion, a compatible primer should have been used. Re-sanding and repriming may be necessary.
The paint was likely applied too thickly or from too close a distance. Apply in thin, even coats, holding the can at the recommended distance (25-30cm). Allow adequate drying time between coats.
While matched to specific codes, variations can occur due to surface condition, lighting, or previous coatings. Ensure the correct product code was purchased. Test on an inconspicuous area. For significant discrepancies, consider a full repaint or professional color matching.
Setup: Ensure the surface to be painted is clean, dry, and free from grease and dirt. For best results, apply a compatible Hycote primer. Shake the 150ml aerosol can vigorously for at least two minutes before use and periodically during application. Hold the can upright, approximately 25-30cm from the surface. Apply in light, even coats, allowing sufficient drying time between each coat. Avoid applying in excessively cold, damp, or humid conditions, or in direct sunlight.
Compatibility: This paint is compatible with OEM finishes, acrylic paints, and cellulosic paints. It is designed to adhere well to primed surfaces. Always test compatibility on an inconspicuous area if unsure.
Care: Store the can in a cool, dry place, away from direct sunlight and sources of ignition. After use, turn the can upside down and press the nozzle for a few seconds to clear any remaining paint, preventing blockages.
