Jarder Hot Tub System Flush - 2 x 5L
Best current price£29.95from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£29.95Visit shop B&Q - Hot Tub And Spa System Flush 2 X 5L
Visit shopB&Q£29.95Visit shop One Offer
1 offer from £29.95
View price history by clicking the chart icon.
Product Information
Full details
The Jarder Hot Tub System Flush is designed for hot tub owners seeking to maintain optimal water quality and system efficiency. Its powerful formula deeply cleans internal pipework, removing a range of contaminants like grease, body oils, and dirt, leading to a more hygienic and effective hot tub experience. While highly concentrated and economical, users should adhere to the recommended dosage to avoid potential issues.
All features
| Model Part Number | CL-HTSF-5L-X2 |
|---|---|
| Brand | Jarder |
Extended Product Information
FAQs
How often should I use Jarder Hot Tub System Flush?
It is recommended to use the system flush at every water change or at least every 3 months, whichever comes first, to maintain the cleanliness of your hot tub's internal pipework.
What is the recommended dosage?
The recommended dosage is 500ml of the system flush for every 1000L of water in your hot tub.
Can I use the hot tub while the system flush is in the water?
No, the hot tub should not be occupied or used while the system flush is circulating or soaking in the water. The product is for cleaning the system, not for use with bathers.
How long does the soak time need to be?
After the initial 20-30 minute pump circulation, the solution should be left to soak for at least 3-6 hours, or ideally overnight, for maximum effectiveness.
Do I need to rinse the hot tub after draining?
Yes, it is recommended to rinse the hot tub shell with fresh water and wipe it down to remove any loose debris before refilling with fresh water.
What if I use too much product?
Using significantly more than the recommended dosage is not advised and could lead to excessive foaming or require more thorough rinsing. Always adhere to the 500ml per 1000L guideline.
Is this product safe for all hot tub components?
When used as directed, the formula is designed to be safe for typical hot tub plumbing and components. Avoid prolonged contact with sensitive surfaces if unsure.
Troubleshooting
Product does not seem to be flushing debris effectively.
Ensure the pumps were running continuously during the initial circulation period and that the recommended dosage was used. For heavily soiled systems, a second application might be considered after a full water change and refill cycle, following the instructions carefully.
Difficulty draining the hot tub after use.
This is related to the hot tub's drainage system, not the cleaning product. Ensure your drain valve is fully open and that there are no blockages in the drain line.
Cloudy water after refilling.
Ensure the system was thoroughly flushed during the draining process and that all residual cleaning solution was removed. Double-check that sanitizers were added correctly after refilling with fresh water.
Pros and Cons
Pros
- Deeply cleans internal pipework and jets.
- Effectively removes various contaminants like oils and grime.
- Economical due to its concentrated formula.
- Helps improve water quality and system efficiency.
- Suitable for regular maintenance routines.
Cons
- Requires adherence to specific dosage instructions.
- Not intended for use with living organisms in the tub.
- Needs to be thoroughly flushed from the system before refilling with fresh water.
Setup, Compatibility & Care
Setup:
- Ensure your hot tub water is at its normal operating temperature (around 37°C).
- Turn off the heater but leave the pumps running.
- Add the recommended dosage of 500ml of Jarder Hot Tub System Flush per 1000L of water directly into the tub.
- Run the pumps continuously on high speed for 20-30 minutes to allow the solution to circulate through the pipework.
- Turn off the pumps and leave the solution to soak in the system for at least 3-6 hours, or preferably overnight.
- Drain the hot tub completely.
- Rinse the hot tub shell with fresh water and wipe down.
- Refill the hot tub with fresh water and follow your usual start-up procedures (including adding sanitizers).
Compatibility:
This product is suitable for all standard hot tubs and spa systems. It is designed to be safe for use with most common hot tub materials when used as directed.
Care:
Store the product in a cool, dry place away from direct sunlight and out of reach of children. Ensure the cap is tightly sealed after each use. The product has a typical shelf life of two years if stored correctly.