Robimatic Double Pipe Clips - 15mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Robimatic 15mm Double Pipe Clips are essential components for professional plumbers and DIY enthusiasts who need to secure dual-run piping systems efficiently. These clips provide a robust mounting solution that significantly minimizes pipe vibration and system noise caused by water pressure fluctuations, ensuring a quiet and stable installation; however, users should ensure they have the appropriate mounting hardware for their specific wall substrate, as screws are not included.
All features
| Brand | Robimatic |
|---|
Extended Product Information
FAQs
Can these be used for hot water pipes?
Yes, these clips are designed to handle standard residential hot and cold water temperatures without deforming.
Are these clips compatible with PEX piping?
They are designed for 15mm pipes, but fit may vary based on the outer diameter of your specific PEX tubing.
How many clips should I use per meter?
It is generally recommended to use a clip at least every 600mm to 1000mm to prevent sagging.
Can I paint these clips to match my walls?
Yes, the material is generally receptive to standard interior paints if you wish to blend them with your decor.
Are these suitable for outdoor use?
They are primarily designed for interior use. Extended exposure to direct UV light may degrade the material over time.
Troubleshooting
Pipe feels loose within the clip
Verify that the pipe is indeed a standard 15mm diameter and ensure it is pushed fully into the clip until it clicks into place.
Clip is cracking during installation
Ensure you are using the correct screw size and not over-torquing the mounting screw, which can stress the clip housing.
Rattling persists after installation
Check that the clips are spaced closely enough and ensure that the pipe run is secured at both ends to prevent lateral movement.
Pros and Cons
Pros
- Reduces pipe vibration and rattling noise effectively
- Time-saving installation for dual-run piping setups
- Provides a clean, professional aesthetic for exposed pipework
- High-quality construction ensures long-term reliability
Cons
- Mounting screws are not included in the package
- Designed exclusively for 15mm pipe diameter
- Requires specific spacing for proper alignment
Setup, Compatibility & Care
To install, mark the desired path for your 15mm pipes, ensuring the clips are spaced appropriately according to local building regulations (typically every 500mm to 1000mm depending on material). Secure the clip base to the wall or floor joist using a suitable screw and anchor for your specific wall material. Once the base is fixed, snap your 15mm pipes firmly into the dual channels. For maintenance, periodically inspect the clips during routine plumbing checkups to ensure the tension remains firm and that no environmental debris is interfering with the fit. Do not over-tighten mounting screws, as this may distort the clip geometry and compromise its ability to dampen vibration.