Best current price£13.96from eBay
Shopping.co.uk recommended and popular offers
eBay£13.96Visit shop Mirka Autonet 150mm 6"" Sanding Mesh Disc P320 25 Discs Paintwork Dust Extraction
Visit shop5 offers from £13.96 - £24.56
View price history by clicking the chart icon.
The Mirka Autonet Sanding Mesh Disc P320 is an essential tool for professional automotive body shops and serious DIY enthusiasts who require high-performance surface preparation. By utilizing advanced mesh backing rather than traditional paper, it provides superior dust extraction, leading to a cleaner workspace and longer abrasive life; however, users should be aware that the mesh structure requires a compatible hook-and-loop backup pad to function at peak efficiency.
| Model Part Number | AE24105032 |
|---|---|
| Brand | Mirka |
No, these discs fit any standard 150mm orbital sander equipped with a hook-and-loop backup pad.
Yes, but you will lose the primary advantage of the mesh design, which is dust extraction. It is highly recommended to use them with an extraction system.
Replace the disc when you notice a significant decrease in cutting speed or when the abrasive grains appear worn and smooth.
P320 is a medium-fine grit. It is better suited for surface finishing and preparation rather than removing large amounts of heavy paint or rust.
Yes, you can lightly tap the disc or use compressed air to remove loose dust, which can extend the usable life of the disc.
While not strictly required, a pad saver is highly recommended to protect your sander's backup pad from the abrasive mesh backing.
Check the hook-and-loop backup pad for debris or worn-out hooks. Replace the backup pad if it no longer provides a secure grip.
Verify that the vacuum system is active and that the dust extraction hose is not blocked. Reduce sanding pressure to allow the suction to clear debris effectively.
Ensure the sander is held flat against the surface and that the disc is correctly centered on the backup pad.
To set up the Mirka Autonet disc, simply align the 150mm mesh disc with your sander's hook-and-loop backup pad and press firmly to secure. It is highly recommended to use a thin interface pad or pad saver between the sander and the mesh disc to protect the backup pad's hooks from wear. During use, avoid excessive pressure, as this can compress the mesh and reduce airflow. After use, inspect the disc for wear; if it is not heavily clogged, you can gently tap the disc to dislodge remaining dust, but avoid using aggressive solvents that might damage the bonding adhesive. Store discs in a cool, dry place away from direct sunlight to maintain the integrity of the abrasive grains.
