Brake Calliper Bleeding Valve Repair Set - US PRO
Best current price£43.05from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£43.05Visit shop B&Q - Tools Brake Calliper Bleeding Bleeder Valve Repair Set 1/41/8 Npt 6232
Visit shopB&Q£43.05Visit shop One Offer
1 offer from £43.05
View price history by clicking the chart icon.
B&QB&Q - Tools Brake Calliper Bleeding Bleeder Valve Repair Set 1/41/8 Npt 6232
Free delivery in 1–3 days
£43.05
Visit shop
Product Information
Full details
This US PRO Brake Calliper Bleeding Valve Repair Set is designed for automotive mechanics and DIY enthusiasts needing to restore stripped or damaged brake caliper bleeding valves. Its key benefit is providing a complete solution to repair and re-thread valves, saving the cost of caliper replacement. A caveat is that it requires careful use and understanding of threading to avoid further damage.
All features
| Model Part Number | 6232 |
|---|---|
| Brand | us pro |
Extended Product Information
FAQs
What thread standard do the valves and inserts use?
The set uses National Pipe Taper (NPT) threads, specifically 1/8" x 27 NPT and 1/4" x 18 NPT.
Can this set repair physically broken bleed valve stems?
This set is designed for repairing damaged or stripped threads within the caliper body where the bleed valve screws in. It is not intended for repairing a physically broken valve stem.
What material are the drill bits and taps made of?
The drill bits are made of HSS 6542 and M35 steel. The hand taps are also made of HSS 6542 steel.
How do I ensure I select the correct size insert and tap?
The set includes two sizes: 1/8" NPT and 1/4" NPT. Always confirm the original size of the valve or the intended replacement size, and use the corresponding tap and insert.
Is special lubricant required for tapping?
Using a dedicated cutting fluid or tapping oil is highly recommended. It lubricates the tap, reduces friction, helps clear metal chips, and extends the life of the tap.
What is the purpose of the milling bit?
The milling bit is used to create a clean, flat surface on the existing valve seat inside the caliper after drilling, ensuring the new threaded insert will seat properly and create a good seal.
How should I store the repair set?
Store the set in its original case in a dry environment. Clean tools after use and consider applying a light oil to metal parts to prevent rust.
Troubleshooting
Drill bit not cutting effectively
Ensure the drill is rotating at an appropriate speed for metal. Apply steady pressure and consider using a cutting fluid to lubricate the bit and material.
Tapping threads is difficult or binding
Ensure you are using the correct NPT tap for the insert size. Apply cutting fluid, use a tapping wrench, and turn the tap with a partial turn forward and a quarter turn back to clear chips.
Threaded insert does not fit properly
Verify that the correct size drill bit and tap were used corresponding to the NPT thread size of the insert. Ensure the valve seat was properly milled and countersunk.
Tool appears to be dull
HSS and M35 tools are durable but can dull with extensive use or improper application. Ensure you are using them correctly and consider professional sharpening if significantly worn.
Pros and Cons
Pros
- Allows for repair of stripped caliper bleeding valves, avoiding costly caliper replacement.
- Includes a wide range of tools for a complete deburring and re-threading process.
- Supports both common 1/8" and 1/4" NPT valve sizes.
- High-speed steel (HSS) and M35 drill bits ensure durability.
- Titanium Nitrate coating on the milling bit enhances performance and lifespan.
Cons
- Requires mechanical skill and precision; improper use could damage the caliper further.
- Not suitable for heavily corroded or physically broken valve bodies beyond thread repair.
- Specific NPT thread knowledge is beneficial for optimal results.
- The set is specialized and may not be frequently used by all home mechanics.
Setup, Compatibility & Care
Compatibility: This set is specifically designed for brake caliper bleeding valves with 1/4" and 1/8" NPT thread sizes. Ensure your caliper's valve thread matches these specifications before use.
Setup & Use:
- Clean Area: Ensure the bleeding valve area is clean and free of debris.
- Drill Out: Select the appropriate drill bit (6.0mm or 8.5mm) and carefully drill out the damaged valve.
- Mill Surface: Use the 11mm milling bit to clean and prepare the valve seat.
- Countersink: Apply the 13.4mm 90° countersink to ensure a flush fit for the insert.
- Tap Threads: Use the corresponding NPT hand tap (1/8" or 1/4") to create new threads.
- Insert New Bush: Screw in the appropriate size threaded insert (1/4" NPT or 1/8" NPT).
- Final Check: Ensure the new insert is securely seated.
Care: After each use, clean all tools thoroughly with a degreaser and dry them completely. Store the set in its original case to prevent damage and corrosion. Apply a light coat of oil to the metal components for long-term storage to prevent rust.