Setup, Compatibility & Care
Setup for Jump-Starting:
- Connect the red clamp to the positive (+) terminal of the dead battery.
- Connect the black clamp to the negative (-) terminal of the dead battery or a suitable grounding point on the engine block.
- Turn on the power pack.
- Attempt to start the vehicle. If it doesn't start, wait 30 seconds and try again.
- Once the vehicle starts, turn off the power pack and disconnect the clamps in reverse order (black first, then red).
Setup for Tire Inflation:
- Ensure the power pack is charged.
- Screw the tyre inflator hose onto the compressor outlet valve.
- Attach the other end of the hose securely to the tire valve.
- Turn on the power pack.
- Use the buttons on the LCD screen to set your desired PSI.
- Press the power button to start inflation. The compressor will stop automatically when the set pressure is reached.
Compatibility:
The MP7435 is compatible with 12V petrol engines up to 6.0L and 12V diesel engines up to 3.0L. It can charge standard USB devices.
Care:
- Keep the power pack clean and dry. Wipe with a soft, damp cloth if necessary.
- Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures.
- Recharge the internal battery at least every 3-6 months to maintain battery health, even if not in use.
- Avoid dropping or subjecting the unit to harsh impacts.
- Use only the supplied accessories.