Best current price£12.83from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£12.83Visit shop Startech.com Yellow 10M Slim Cat6 Ethernet Cable. Snagless. 100W Poe.
Visit shop4 offers from £12.83 - £16.75
View price history by clicking the chart icon.
This StarTech.com Slim CAT6 Ethernet Cable is designed for high-density network installations, offering improved airflow and easier routing in crowded spaces. It's ideal for IT professionals and network administrators who need reliable Gigabit and 100W PoE++ connectivity with enhanced durability. A potential consideration is its specific slim design, which, while beneficial for density, might require compatible slim-fit ports in some legacy equipment.
| Series | Slim CAT6 |
|---|---|
| Model Part Number | N6PAT10MYLS |
| Brand | StarTech.com |
The 'Slim' designation refers to its significantly reduced outer diameter (3.6mm) compared to standard Cat6 cables. This thinner profile improves flexibility and allows for better airflow in high-density installations.
Yes, this cable supports Power over Ethernet (PoE) and is specifically rated for PoE++ (IEEE 802.3bt Type 4), capable of delivering up to 100W of power. Ensure your network equipment also supports PoE++.
LSZH (Low Smoke Zero Halogen) jackets are designed to emit less smoke and fewer toxic fumes when exposed to heat or fire, making them safer for use in enclosed or poorly ventilated areas compared to standard PVC jackets.
No, this is an Unshielded Twisted Pair (UTP) cable. It is constructed with 4 pairs of twisted wires (28AWG) and meets Cat6 specifications for performance without shielding.
It means each cable has been individually tested using a Fluke CableAnalyzer to ensure it meets or exceeds the performance standards for Category 6, guaranteeing signal integrity and compliance with specifications like minimal Near-End Crosstalk (NEXT).
This Cat6 cable supports data transfer rates of up to 1000 Mbit/s (Gigabit Ethernet) and frequencies of up to 250 MHz.
The connectors feature 50-micron gold-plated contacts for reliable conductivity and corrosion resistance. The snagless boot design protects the RJ45 clip, preventing breakage during installation and use.
Check that both ends of the cable are securely plugged into the correct ports. Try a different cable to rule out a faulty connection. Verify network device status lights. Ensure the network interface is enabled on your computer.
Confirm the cable is connected to Gigabit Ethernet ports on both ends. Ensure the connected devices support Gigabit speeds. Check for physical damage to the cable or connectors. Test with a known-good Cat6 cable to compare performance.
Verify that the connected switch or injector supports PoE++ (IEEE 802.3bt) and can deliver the required wattage (up to 100W). Ensure the powered device is within the cable's supported power budget. Check for any physical damage to the cable, which could impede power delivery.
Inspect the cable for kinks, cuts, or damage to the jacket or connectors. Ensure the RJ45 connectors are fully seated. Test the cable in a different location or with different equipment to isolate the issue.
Setup:
This is a standard Ethernet patch cable designed for plug-and-play connectivity. Simply connect one RJ45 connector to your network device (e.g., router, switch, computer) and the other to your network source.
Compatibility:
Care:
