Twin Air Air Filter - Yamaha BANSHEE 350 1987-2006 - 152900

Cleaning frequency depends on riding conditions. In dusty environments, clean after every few rides. In cleaner conditions, clean as needed, typically every 10-15 rides. Always inspect the filter for visible dirt buildup.

No, it is strongly recommended to use a dedicated air filter oil specifically designed for foam filters. Regular motor oil can degrade the foam and adhesive over time and may not provide the correct tackiness for trapping dirt.

The dual-layer design provides a progressive filtration system. The coarser outer layer captures larger debris, preventing it from clogging the finer inner layer, which then captures smaller particles. This ensures maximum airflow while offering superior protection.

Replace the filter if you notice any tears or significant damage to the foam, or if the sealing ring is cracked or deformed. Filters can typically be cleaned and re-oiled many times before needing replacement.

Yes, when properly oiled, this filter is effective in both dry and wet conditions. The air filter oil helps bind dirt and dust, and also provides a barrier against water spray.

Use a dedicated foam air filter cleaner. Mild detergents or solvents like mineral spirits can also be used cautiously, but always rinse thoroughly and ensure they do not degrade the adhesive. Avoid gasoline or harsh industrial solvents.

Ensure the airbox is clean and free of debris. Verify that the filter's sealing ring is lubricated and that the filter is correctly seated. Check for any damage to the airbox rim.

The filter may be over-oiled, restricting airflow. Re-clean and re-oil the filter, ensuring only a light, even coating is applied and excess oil is squeezed out.

Ensure you are using cleaning agents recommended for foam air filters and that they are compatible with the filter's adhesive. Avoid excessively harsh solvents that could degrade the glue over time. Refer to care instructions for appropriate cleaning methods.