Best current price£21.76from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£21.76Visit shop Polypipe 110Mm Solvent Soil 135Deg Offset Bend Single Socket (Solvent X Spigot) Sb404b Black
Visit shop2 offers from £21.76 - £25.99
View price history by clicking the chart icon.
This guide is for plumbers, builders, and DIY enthusiasts working with drainage and soil systems. The POLYPIPE BUILDING PRODUCTS SB404B 110mm Black Offset Bend provides a crucial 135° angle to navigate around obstacles in pipe runs, ensuring efficient waste and foul smell removal from residential buildings. While its solvent weld and push-fit options offer versatility, users must ensure correct solvent application for a secure, leak-free joint.
| Model Part Number | SB404B |
|---|---|
| Brand | Polypipe |
An offset bend is used in pipework to change the direction of the run, typically to navigate around obstructions like beams, walls, or other services, allowing for a continuous flow path.
This specific offset bend creates a 135° angle in the pipe run.
It features a solvent socket on one end and a spigot on the other, designed for solvent weld connections.
You will need solvent cement suitable for PVC/ABS pipes, an applicator (like a dauber or brush), and potentially a pipe cutter and deburring tool for preparing the pipes. A tape measure is also essential for accurate installation.
No, solvent cement is typically sold separately. You will need to purchase the appropriate type and quantity for your installation.
While primarily designed for soil and vent systems, 110mm pipes are also common in some rainwater systems. However, always confirm compatibility with your specific rainwater system requirements.
The approximate dimensions are Height: 115.0 cm, Width: 150.0 cm, Depth: 200.0 cm, and it weighs 0.3 kg. Note: These dimensions seem unusually large for a single fitting; please verify with product packaging or manufacturer specifications if precise measurements are critical.
Ensure solvent cement was applied correctly and allowed to cure fully. Check for cracks in the fitting or pipe. If leakage persists, the joint may need to be cut out and remade.
Verify that both the pipe and fitting are the correct 110mm diameter and that the ends are clean and free from obstruction or deformation. Ensure solvent cement is not partially cured, which can act as an adhesive prematurely.
Double-check measurements and ensure the bend is installed in the correct orientation. The 135° angle is fixed; if a different angle is required, alternative fittings may be necessary.
Setup:
Compatibility:
Care:
