Smart Alert with Brake Detection: Experience advanced safety with the TR150 series tail light, des...Smart Alert with Brake Detection: Experience advanced safety with the TR150 series tail light, designed to keep you visible day or night. It features smart brake sensing and wide-angle illumination, automatically adjusting to your ride for optimal visibility. The IPX6 water-resistant design ensures reliable performance in any weather, and its versatile installation allows for preferred setup. High Visibility: Equipped with 4 high-brightness red LEDs, the tail light's flashing mode provides up to 150 lumens of brightness, visible from up to 1.5km away, ensuring rider safety, especially in low-light conditions. 280° Field of View: Offers a wide 280° field of view, making the rider noticeable from multiple angles, enhancing safety day or night. Brake Detection: Automatically highlights the rear light for 3 seconds when braking to alert drivers behind, effectively preventing traffic accidents. Auto On-Off: After being stationary for 2 minutes, the tail light automatically turns off. It reactivates when it detects cycling movement. 6 Lighting Modes: Provides flexibility for various riding conditions. Three Installation Options: Compatible with round and aero seat post mounts, saddle mounts, and backpack mounts. USB-C Charging Port: Features a reversible connector for easy charging. IPX6 Water-Resistance: Usable even when riding in the rain. Key Features: Eye-catching flashing with max 150 LED lumens for great daytime visibility. Built-in motion sensor for brake detection and auto on-off function. Special lens design to increase side visibility. Auto power save and low battery indicator. USB-C charging port. IPX6 water-resistance. Quick release design compatible with round and aero seatposts. 2 years warranty and limited lifetime warranty. Tech Specifications: LED: 4* high-efficiency red LEDs. Battery: 800mAh/3.7V rechargeable Li-ion battery. Dimensions (light unit): 38mm (L)*25mm (W)*57mm (H). Weight (light unit): 50g. Mode-Brightness (lumens)-RunTime (hrs)-Impact Resistance-Water Resistance: High-20-6-1 meter-IPX6. Mid-10-12.5-1 meter-IPX6. Low-5-18.5-1 meter-IPX6. Warning Flashing-150-6.5--IPX6. Rapid Flashing-50-11.5--IPX6. Slow Flashing-50-11--IPX6.
The Ravemen TR150 Smart Alert Rear Light is designed for cyclists seeking enhanced safety and visibility. Its key benefit is the intelligent brake detection and high-lumen flashing mode, making you noticeable to other road users. A potential caveat is its reliance on motion for auto on-off, which might require manual deactivation in some storage scenarios. This light features smart brake sensing, wide-angle illumination, IPX6 water-resistance, and multiple mounting options.
All features
Model Part Number
35496
Brand
Ravemen
Extended Product Information
FAQs
How do I activate the brake detection feature?
The brake detection feature is integrated into the light's accelerometer and activates automatically when it senses a deceleration. Ensure the light is securely mounted and powered on.
The light includes a low battery indicator. When the battery is low, the indicator will alert you, prompting you to recharge the device.
Can I use this light while charging?
Yes, the Ravemen TR150 can be used while charging via its USB-C port.
What is the warranty period for this light?
The Ravemen TR150 comes with a 2-year warranty and a limited lifetime warranty.
Is the mounting bracket interchangeable with other Ravemen lights?
The TR150 uses a quick-release design compatible with round and aero seatposts. While specific compatibility may vary, Ravemen often uses standardized mounting systems for their lights.
How long does it take to fully charge the battery?
A full charge time is not specified in the product information, but it features a standard USB-C charging port, typically allowing for convenient recharging.
Troubleshooting
Light does not turn on
Ensure the battery is charged. Press and hold the power button for 1 second. Check if the auto-off feature has engaged and if motion is detected to reactivate.
Brake detection is not working
Verify that the light is securely mounted and not excessively tilted. Ensure the motion sensor is not obstructed. The brake detection feature requires a noticeable deceleration.
Light turns off unexpectedly
The auto-off feature may have engaged due to inactivity. Move the bike or light to trigger the motion sensor. If the battery is low, the light may turn off to conserve power; recharge the battery.
Light is not charging
Ensure the USB-C cable is properly connected to both the light and the power source. Try a different USB-C cable and power source. Clean the charging port gently with a dry, soft brush.
Poor performance in rain
Confirm that the USB-C port cover is securely closed. While IPX6 rated, extreme submersion should be avoided. Ensure no visible damage to the casing.
Very bright warning flash mode increases visibility during the day and night.
Wide field of view improves awareness of the cyclist from all directions.
Automatic on/off feature is convenient for daily use.
Durable and water-resistant construction for all-weather performance.
Multiple mounting options offer great flexibility.
Cons
Auto on-off may require manual deactivation if stored without motion for extended periods.
Battery life in the highest brightness modes is relatively short.
Requires a USB-C cable for charging, which may not be included.
The unit is small, which could be a potential loss risk if not secured properly.
Specialized lens design might not be universally compatible with all seat post clamp designs.
Setup, Compatibility & Care Instructions
Setup:
Select your preferred mounting location: standard round seat post, aero seat post, saddle rail, or backpack clip.
Attach the appropriate mount securely using the provided hardware.
Slide the TR150 light unit onto the mount until it clicks into place.
Compatibility:
Seat Posts: Compatible with both standard round and aero-shaped seat posts.
Saddles: Fits most standard saddle rail systems.
Backpacks: Designed to clip onto fabric or straps.
Charging: Requires a standard USB-C cable (not always included) and a USB power source.
Care:
Cleaning: Wipe the light unit and lens with a soft, damp cloth. Avoid abrasive cleaners.
Charging: Fully charge the battery before first use. Recharge when the low battery indicator is active. Use the USB-C port for charging.
Storage: If storing for an extended period, ensure the light is charged and consider manually turning it off to prevent accidental battery drain if stored without motion.
Maintenance: Periodically check mounting hardware for tightness.