Golden Grace Linear Door Handles - Matt Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Golden Grace Linear T-Bar Door Handles in Matt Black are designed for homeowners seeking a stylish and secure upgrade for their internal doors. Offering a key and thumbturn mechanism for enhanced privacy and a cohesive aesthetic with included hardware, these handles provide a refined look and reliable functionality. A potential caveat is that the 70mm barrel size may require specific door preparations.
All features
| Colour | Black |
|---|---|
| Brand | Golden Grace |
Extended Product Information
FAQs
What type of door is this handle set suitable for?
This handle set is designed for standard internal doors, such as those found in bathrooms, bedrooms, and living areas. It is not intended for exterior use.
What does '70mm barrel' mean for the lock body?
The '70mm barrel' refers to the length of the lock case (body) from the center of the spindle hole to the end of the lock case. This is a common size for internal door locks.
Is this set suitable for a bathroom door?
Yes, the key and thumbturn mechanism makes it ideal for bathroom doors, offering privacy and an emergency override option.
Do I need to buy hinges separately?
No, this set includes matching Ball Bearing Hinges, providing a complete hardware solution for a single door.
How do I clean the matt black finish?
Wipe with a soft, damp cloth. Avoid abrasive cleaners or chemicals. For tougher marks, use a mild soap solution and dry thoroughly.
Can this handle set be used on doors thicker or thinner than standard?
This set is generally designed for doors between 35mm and 45mm thick. For doors outside this range, compatibility may be limited.
What is included in the set?
The set includes one pair of Linear T-Bar handles, a 70mm internal barrel lock body, a matching keyhole escutcheon, and Ball Bearing Hinges.
Troubleshooting
Handles feel loose or wobbly.
Check and tighten the fixing screws located on the inside of the door handle. Ensure the spindle is correctly seated.
Key or thumbturn is stiff or difficult to operate.
Ensure the lock mechanism is properly aligned and free from debris. Lubricate the keyhole with a graphite-based lubricant if necessary.
Door does not close or latch properly.
Check the alignment of the door and the strike plate on the frame. Adjust the hinges or strike plate as needed. Ensure the lock bolt is not obstructed.
Hinges squeak during operation.
Apply a small amount of lubricant (e.g., WD-40 or silicone spray) to the hinge pins. If squeaking persists, check for damage to the hinges.
Pros and Cons
Pros
- Enhances door aesthetics with a modern matt black finish.
- Provides enhanced security and convenience with key and thumbturn functionality.
- Offers a complete hardware solution with included lock body, escutcheon, and hinges.
- Durable construction designed for long-term use.
- Versatile design suitable for both bathroom and standard key lock doors.
Cons
- The 70mm barrel may not be compatible with all existing door lock preparations without modification.
- Primarily designed for internal doors; not suitable for exterior use.
- Matt black finish, while stylish, may show wear over time with heavy use.
- Requires specific Euro Lock body installation, which might be unfamiliar to some DIYers.
Setup, Compatibility & Care
Setup: Installation typically involves removing the old handles and lock mechanism. The new handles will pass through the door, with the lock body and escutcheon fitting into the appropriate pre-drilled holes. Secure the handles and lock mechanism using the provided screws. Ensure the spindle (the bar connecting the handles) is correctly aligned. The hinges should be installed in the pre-drilled hinge mortises on the door and frame.
Compatibility: This set is designed for standard internal doors. The 70mm Euro Lock body is a key component, and it's essential to verify that your door has compatible cutouts for this type of lock. The handles are suitable for doors with a thickness typically ranging from 35mm to 45mm.
Care: To maintain the matt black finish, clean the handles with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish. For stubborn marks, a mild soap solution can be used, followed by wiping with a clean, dry cloth. Regularly check that screws remain tight to ensure optimal performance.