Draper Turbo Lance - 14438

This turbo lance is compatible with Draper models 14434, 97776, 98674, 98676, and 98677.

A turbo lance provides a more concentrated and powerful cleaning action compared to a standard nozzle, allowing for faster removal of stubborn dirt and grime, especially on large surfaces.

No, this turbo lance is specifically designed for and compatible only with the listed Draper pressure washer models.

The lance connects to pressure washers equipped with a Total Stop Valve. This system automatically activates and deactivates the high-pressure cleaner's motor each time the trigger on the lance is operated, prolonging motor life and reducing energy use.

While it can clean surfaces, this lance is designed for heavy-duty commercial applications. For standard home patios, a less intense nozzle might be more appropriate to avoid potential surface damage.

After each use, it is recommended to flush the lance with clean water to remove any residual debris. Store it in a dry environment.

Check that the lance is securely attached to the pressure washer hose. Ensure the nozzle is not blocked by debris; clean if necessary. Verify the pressure washer itself is operating at its intended pressure.

Ensure the connection between the lance and the high-pressure hose is tight and properly seated. Inspect the O-rings or seals for damage and replace if worn.

This indicates the Total Stop Valve system is functioning as intended by shutting off the motor when the trigger is not engaged. If the cycling is too frequent or erratic, check for small leaks in the system, as even a minor leak can cause the pump to cycle. Ensure the lance trigger is fully releasing.