Mira Shower Tray - 1200mm X 900mm - Left Handed - White


Currently unavailable


Currently unavailable
This Mira Shower Tray is designed for homeowners seeking a durable, safe, and hygienic showering solution. Its key benefit is the anti-slip surface combined with antibacterial technology, offering enhanced safety and cleanliness. A caveat is that riser kits, panels, and leg sets are sold separately, requiring additional purchases for a complete raised installation. This low-profile tray is scratch, chip, and discolouration resistant, features BioCote technology to reduce bacteria and mould, and includes a high-flow Vortex waste system.
| Model Part Number | 1.1697.026.AS |
|---|---|
| Brand | Mira |
BioCote is an antimicrobial technology integrated into the tray material. It works to inhibit the growth of bacteria and mould on the surface by up to 99.9%, contributing to a cleaner and more hygienic shower environment.
No, the Mira Flight Safe anti-slip surface is designed to be easily cleaned with a soft cloth and mild detergent. Avoid abrasive cleaners or pads that could damage the texture.
Yes, this tray is suitable for a low-profile installation directly onto the floor, provided the waste pipework allows for it. A riser kit is only needed for raised installations.
The included Vortex waste system is designed for rapid drainage, capable of handling a flow rate of 25 litres per minute.
The product includes the Mira shower tray and the Vortex waste fitting. Riser kits, panels, and leg sets for raised installation are sold separately.
This is a left-handed tray. When you are facing the tray where the shower door would typically open, the waste outlet is located on the left side.
Please refer to the manufacturer's official documentation or the retailer for specific warranty details, as these can vary.
Check the Vortex waste trap for blockages (hair, soap residue). Clean the waste trap as per manufacturer guidelines. Ensure the waste pipe is not kinked or obstructed.
Ensure you are using only mild, non-abrasive cleaning products. Avoid abrasive pads or harsh chemicals. Minor scuffs may be buffed out with appropriate mild cleaners; consult Mira's cleaning recommendations.
The tray may not be properly supported. Check that it is level and securely fixed to the sub-floor. If installed with a riser kit, ensure all legs are correctly positioned and secured, and the kit is properly assembled.
Verify the tray is perfectly level. Even a slight tilt away from the waste outlet can cause water to collect. Adjust the support structure or levelling feet if applicable.
Setup:
This shower tray is designed for strength and ease of fitting. For raised installations, ensure you have a compatible riser kit, panel, and leg set, as these are not included. The tray should be installed on a level and stable sub-floor. Follow the manufacturer's instructions carefully for secure fitting and waste connection.
Compatibility:
This is a left-handed tray, meaning the waste outlet is positioned on the left side when facing the tray. Ensure this configuration matches your bathroom's plumbing layout. It is compatible with standard shower enclosures and plumbing systems. Riser kits, panels, and leg sets must be purchased separately if a raised installation is desired.
Care:
To maintain the tray's finish and hygiene properties: