Best current price£2.95from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£2.95Visit shop 4 Pin Dual Ide To 8 Pin Pci-E Power Supply Video Graphics Card Cable 5060498071567
Visit shop2 offers from £2.95 - £3.85
View price history by clicking the chart icon.
The Kabalo 4 Pin Dual Molex to 8-Pin PCI-E power adapter is designed for PC builders and gamers who need to upgrade their graphics hardware using an older power supply unit that lacks dedicated PCI-E connectors. By bridging the gap between legacy Molex power connections and modern high-performance graphics cards, this cable offers a cost-effective solution for system upgrades; however, users should ensure their existing power supply has sufficient total wattage to support the power requirements of their new GPU.
| Colour | Multicolor |
|---|---|
| Brand | Kabalo |
No, both Molex connectors should be attached to distribute the load correctly and prevent the cables from overheating.
It is compatible with standard 8-pin PCI-E power ports, but ensure your card does not have a 6+2 pin requirement that exceeds the power budget.
No, it is a pass-through adapter designed to route existing 12V power from the Molex connectors to the 8-pin PCI-E standard.
It will not improve performance beyond the manufacturer's specifications; it simply provides the power required for the card to operate.
It is not recommended, as daisy-chaining can increase electrical resistance and the risk of cable failure.
Ensure both Molex connections are pushed firmly into the PSU cables and that the 8-pin connector is fully seated in the GPU.
This often indicates that the power supply unit lacks the necessary total wattage to support the new GPU; verify your PSU specifications.
Do not force the connection; inspect the connector pins for alignment and try a different Molex cable from the PSU.
To install, ensure your PC is powered down and disconnected from the mains. Plug both 4-pin Molex connectors into separate peripheral power leads coming from your power supply to avoid overloading a single wire. Connect the 8-pin PCI-E end into your graphics card until the locking tab clicks into place. Keep cables organized with zip ties to ensure proper airflow within the chassis. Always inspect the pins for any signs of oxidation or wear before installation. Do not use this adapter if your power supply unit does not meet the minimum recommended wattage specified by your graphics card manufacturer.
