Best current price£13.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£13.99Visit shop B&Q - Worktop Oil Clear Matt Finish 500Ml Indoor Wood Protector Food Safe Oil For Kitchen Tables & Utensils
Visit shop1 offer from £13.99
View price history by clicking the chart icon.
The WooDeeDoo Worktop Oil is designed for individuals seeking to protect and enhance their interior wooden surfaces, particularly kitchen worktops. Its primary benefit is creating a durable, food-safe, and transparent coating that highlights the wood's natural beauty. A key consideration is the 24-hour drying time per coat, requiring patience during application. This natural oil treatment penetrates deeply, offering resistance to scuffs, scratches, and dirt without cracking or peeling, making it ideal for high-use areas like kitchen tables, butcher blocks, and chopping boards.
| Brand | WooDeeDoo |
|---|
Yes, once fully dry, the oil creates a food-safe finish, making it suitable for surfaces that come into direct contact with food, such as chopping boards and kitchen tables.
Each coat typically takes approximately 24 hours to dry. It is crucial to allow adequate drying time between coats for proper curing.
The coverage is approximately 10–12 m² per litre per coat.
No, this oil is designed for bare or previously oiled wood. Old varnish must be completely removed before application.
Reapplication frequency depends on usage. For heavily used surfaces, a maintenance coat may be needed every 6-12 months. Observe the surface for signs of wear or reduced water repellency.
The WooDeeDoo Worktop Oil has a shelf life of 24 months when stored in sealed containers.
The oil enhances the natural color and character of the wood, providing a transparent, matt finish. It does not significantly alter the original tone.
Ensure the oil was applied evenly and that excess was wiped off completely before drying. Apply a thin, uniform coat next time and ensure thorough buffing.
The wood may require additional coats. Allow the oil to cure fully (up to 7 days for full hardness) and apply another thin coat if absorption persists.
This may indicate insufficient protection or exposure to prolonged moisture. Clean the area gently and reapply a coat of oil to the affected spot or the entire surface.
This usually means the oil did not dry properly. Wipe away any excess oil with a clean cloth dampened with a small amount of turpentine (ensure good ventilation) and allow it to dry fully.
Setup:
Compatibility:
Care:
