Floorsaver Epoxy Floor Paint - Grey

Yes, as long as the existing paint is stable, well-bonded, and thoroughly cleaned and sanded to provide a key for the new layer.

In standard conditions with proper preparation, the paint can last several years. Life span depends heavily on the intensity of the traffic and how well the surface was prepared.

On highly porous concrete, a thinned first coat of the epoxy can act as a primer, but check the product label for specific surface-type instructions.

This product is primarily formulated for indoor or covered environments; UV exposure from direct sunlight may cause colour degradation over time.

Since it is a water-based system, tools can be cleaned with warm soapy water immediately after application before the product starts to harden.

Like most epoxy coatings, it can be slick when wet. For added safety in high-traffic areas, consider adding an anti-slip additive during the final coat.

This is usually caused by damp or contaminated concrete. Ensure the surface is perfectly clean, dry, and etched/abraded before application.

This indicates an incorrect mixing ratio of the two components. Always use a measuring jug to ensure precision.

This is often caused by 'outgassing' from porous concrete. Apply a thin primer coat or seal the floor to release trapped air before applying the final layer.